Hifiverse

Subwoofers — SVS Sound SB-2000 Pro

Description, images, technical data and specifications

SVS Sound SB-2000 Pro
Image source - (c) SVS Sound

The SB-2000 Pro is a sealed powered subwoofer from SVS and part of the 2000 Pro Series, whose models replace earlier SVS subwoofers. A front-firing 12-inch high-excursion driver sits in an MDF cabinet with a rear-mounted Sledge STA-550D amplifier, and settings are made either on the rear panel or from a Bluetooth smartphone app. US prices are USD 749.99 in Premium Black Ash, USD 849.99 in Piano Gloss Black and USD 999.99 in Piano Gloss White.

Key specs that matter

Amplifier rating is 550 W RMS continuous (1500+ W peak dynamic power). Frequency response is 19 - 240 Hz (±3 dB), measured quasi-anechoic with a 2 m ground plane, and SVS expects 2-3 Hz deeper extension in small to mid-size rooms. Input impedance is 16 kohms (unbalanced RCA), and standby consumption is 0.5 W. Dimensions are 372 x 360 x 395 mm (H x W x D) with grille, or 371 mm deep without it. Weight is 17.5 kg with grille.

Engineering and use context

SVS developed the driver for this series. It has an overhung motor with a dual-layer high-purity copper voice coil wound on a 2-inch polyimide-impregnated fibreglass former. Two toroidal ferrite magnets work with a vented low-carbon 1008 steel U-yoke and top plate, and an aluminium shorting sleeve reduces gap induction and distortion. Its cone is vented 1050 aluminium, carried in an FEA-optimised powder-coated basket, with a Nomex composite spider, 24-strand silver-plated Litz wire leads and an extreme-excursion surround.

Inside the Sledge STA-550D is a Class D switching topology with 25 A, 600 V MOSFETs in a fully discrete output stage. A 50 MHz Analog Devices audio DSP with double-precision 56-bit filtering provides low-pass, phase, polarity, room gain compensation and three parametric EQ bands. From the SVS app for iOS and Android these settings can be stored in three custom presets, and changes show in real time on both the app and the rear-panel Intelligent Control Interface (ICI) with push-button controls. Also on the rear panel are stereo RCA inputs and outputs, a USB port for service and accessory power, auto/on switching and a 3-12 V AC/DC trigger.

Behind the extra-thick MDF front baffle the cabinet has extensive internal bracing and acoustic insulation. An extra-thick ABS fabric mesh grille and iso-elastomer feet are supplied.

Pairing

A line-level subwoofer or preamplifier output is required. The trigger input allows switching on together with an AV receiver or preamplifier. Wireless connection requires the SVS SoundPath Wireless Audio Adapter.

Alternatives

The SVS PB-2000 Pro is the ported 12-inch model of the same 2000 Pro Series.

Specifications

  • Model name

    SB-2000 Pro

  • Frequency Response low +/- 3dB (Hz)

    19

  • Frequency Response high +/- 3dB (Hz)

    240

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    550

  • Size (sm)

    37.2 × 36.0 × 39.5

  • Weight (kg)

    17.5

  • Official link