Hifiverse

Subwoofers — SVS Sound PB-2000 Pro

Description, images, technical data and specifications

SVS Sound PB-2000 Pro
Image source - (c) SVS Sound

The PB-2000 Pro is a ported powered subwoofer from SVS with a 12-inch driver and the Sledge STA-550D amplifier. It belongs to the 2000 Pro series, which replaces the original SVS 2000 Series and uses technology from the flagship 16-Ultra Series. It is intended for music systems and home theatre. The regular US price is USD 1,199.99, in Premium Black Ash.

Key specs that matter

A front-firing 12-inch high-excursion SVS driver with an overhung motor is combined with two 76 mm ports. The Sledge STA-550D is a Class D amplifier rated at 550 W RMS continuous and more than 1,500 W peak dynamic power. Frequency response is 16 - 290 Hz (±3 dB) in Standard mode and 17 - 290 Hz (±3 dB) in Sealed mode, measured on a 2 m ground plane. Processing runs on a 50 MHz Analog Devices audio DSP with double-precision 56-bit filtering. Input impedance is 16 kilohms on unbalanced RCA. Dimensions are 532 x 440 x 600 mm (H x W x D) with the grille, 571 mm deep without it, and weight is 29.4 kg.

Engineering and use context

SVS redesigned the driver for the 2000 Pro series. It has a 1050 aluminium vented cone with a composite fibre dust cap and a long-throw parabolic surround made by injection moulding. Its dual-layer high-purity copper voice coil is wound on a 51 mm polyimide-impregnated fibreglass former, and SVS states that this design maximises linearity at full excursion and minimises power compression. Two toroidal ferrite magnets sit in a motor with a low-carbon vented 1008 steel U-yoke and top plate, an aluminium shorting sleeve that reduces gap induction and an aluminium pole piece extension for heat dissipation. Silver-plated Litz leads are woven through the Nomex composite spider, and the powder-coated basket is FEA-optimised.

Output devices of the amplifier are fully discrete 25 A, 600 V MOSFETs. The DSP applies response curves optimised for this cabinet, and two variable port tuning modes, Standard and Sealed, are selected with the two supplied foam port plugs. Built of MDF, the cabinet has an extra-thick front baffle, extensive internal bracing and acoustic insulation, with an extra-thick ABS grille and iso-elastomer feet.

On the rear panel, the Intelligent Control Interface uses push-button controls. A Bluetooth app for iOS, Android and Amazon devices sets low-pass filter, phase and polarity and stores three custom presets.

Pairing

The RCA stereo input connects to the LFE or sub output of an AV receiver or processor or to a stereo preamplifier, and an RCA output is provided. An Auto/On mode and a 3 - 12 V AC/DC trigger input allow automatic power control. The USB output powers the SVS SoundPath Wireless Audio Adapter for a wireless connection.

Alternatives

The SB-2000 Pro is the sealed subwoofer of the same SVS 2000 Pro series.

Specifications

  • Model name

    PB-2000 Pro

  • Frequency Response low +/- 3dB (Hz)

    16

  • Frequency Response high +/- 3dB (Hz)

    290

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    550

  • Size (sm)

    53.2 × 44.0 × 60.0

  • Weight (kg)

    29.4

  • Official link