Hifiverse

Subwoofers - Klipsch RP-1200SW

Description, images, technical data and specifications

Klipsch RP-1200SW
Image source - (c) Klipsch

The RP-1200SW is a powered subwoofer from the Klipsch Reference Premiere range, which comprises the RP-1000SW, RP-1200SW, RP-1400SW and RP-1600SW. It combines a front-firing 12-inch Cerametallic woofer with a Class D amplifier and a front-firing slot port. Klipsch states that the Reference Premiere subwoofers balance amplifier power, driver capability and cabinet volume for maximum low-frequency extension.

Key specs that matter

Frequency response is 16.5 Hz - 138 Hz (±3 dB), and maximum acoustic output is 121 dB. Amplifier type is Class D with an analogue preamp stage, rated at 400 W RMS (800 W peak). The woofer is a 12-inch ultra long throw Cerametallic unit with a spun-copper finish. Enclosure type is bass reflex via a front-firing Aerofoil slot port, and the enclosure material is MDF. Inputs are dual RCA/LFE line inputs and a WA-2 wireless port. Height is 48 cm, width 43.2 cm and depth 65.8 cm, and weight is 31.1 kg.

Engineering and use context

Klipsch describes the newly designed Cerametallic cone as light and rigid, with minimal cone breakup. Behind the slot port is a proprietary internal geometry with an internal flare, and the Aerofoil port profile is designed to minimise port noise.

Controls on the rear panel are a low-pass crossover up to 160 Hz, a 0/180 phase switch, a level control and an Auto/On/Off power switch. In Auto the subwoofer switches on when it senses a signal and goes into standby after 15 - 20 minutes without one, drawing half a watt in standby. A power LED on the front baffle lights green when the amplifier is on and receiving a signal.

An optional WA-2 Wireless Subwoofer Kit connects to the WA port and transmits at 2.4 GHz over a radius of up to about 15 m, and up to four WA-2 kits can be used in one room. Both RCA and wireless inputs can be used at the same time, for example the wireless input for a home theatre system and the RCA input for a two-channel system. Its cabinet has rounded corners, shock-absorbing rubber feet, steel grille posts and a woven cloth grille, and a scratch-resistant ebony vinyl finish covers the entire cabinet. Klipsch gives a 5-year warranty.

Pairing

An AV receiver or processor with an LFE or subwoofer output connects to the L/LFE input. A stereo preamplifier or receiver without a sub output connects through its left and right pre-outs to the L/LFE and R inputs. Wireless connection requires the WA-2 kit, sold separately.

Alternatives

The Klipsch RP-1400SW is the next larger subwoofer in the Reference Premiere range.

Specifications

  • Model name

    RP-1200SW

  • Frequency Response low +/- 3dB (Hz)

    16.5

  • Frequency Response high +/- 3dB (Hz)

    138

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    400 - 800

  • Size (sm)

    48.0 × 43.2 × 65.8

  • Weight (kg)

    31.1

  • Official link