Hifiverse

Subwoofers - Klipsch R-10SWI

Description, images, technical data and specifications

Klipsch R-10SWI
Image source - (c) Klipsch

R-10SWi is a 254 mm (10 in) powered subwoofer of the Klipsch Reference series with a built-in wireless receiver and a pre-paired transmitter in the box. Its larger sibling is the R-12SWi, and both models share one owner's manual. Klipsch also lets the R-10SWi run as a wired subwoofer on a standard subwoofer cable, which is not included.

Key specs that matter

A single front-firing woofer with a spun copper IMG cone is driven by an all-digital amplifier rated at 150 W continuous and 300 W peak. Frequency response is 32 Hz - 120 Hz (±3 dB). The ported MDF enclosure has a removable grille. Dimensions are 370 x 318 x 462 mm (H x W x D), and weight is about 11.6 kg. The wireless link operates in the 2.4 GHz band. Mains input is 100 - 240 V, 50/60 Hz, 2 A.

Engineering and use context

In the box are the subwoofer, a power cable, the wireless transmitter and a separate power supply for the transmitter. According to Klipsch, the transmitter connects to the subwoofer or LFE output of a component. Both units are pre-paired at the factory. To pair them again, the Sync button is held for 3 seconds, and its blue light flashes until the link is made and then turns solid.

For wired use, the L/LFE input takes the subwoofer output of a receiver. A receiver without a subwoofer output connects through its left and right pre-amp outputs to the Left/LFE and Right inputs. The amplifier panel also carries the gain control, the low pass crossover, a 0/180 degree phase switch and the power switch. In the ON/AUTO position the amplifier switches on when it senses a signal and goes into standby after 15 - 20 minutes without one. A green LED on the front baffle lights when the amplifier is on and receiving a signal. Klipsch describes the grille as strong and flexible, and the cabinet finish as a durable vinyl.

Pairing

A surround receiver with a subwoofer or LFE output is required for wireless use. With bass management in the receiver, the low pass knob is set fully clockwise to 160 Hz. Without it, Klipsch gives 50 - 90 Hz for floorstanding main speakers and 90 - 150 Hz for bookshelf or satellite models.

Alternatives

The Klipsch R-12SWi is the 305 mm (12 in) wireless subwoofer of the same Reference series.

Specifications