Hifiverse

Subwoofers - Klipsch RP-1000SW

Description, images, technical data and specifications

Klipsch RP-1000SW
Image source - (c) Klipsch

RP-1000SW is the 254 mm (10 in) high excursion subwoofer of the Klipsch Reference Premiere range and the smallest of its four powered subwoofers. Above it sit the RP-1200SW, RP-1400SW and RP-1600SW. For the series Klipsch aimed at a balance between amplifier power, driver capability and cabinet volume to reach low frequency extension with high output. The model carries a 5-year warranty.

Key specs that matter

Frequency response is 19 Hz - 131 Hz (±3 dB), and maximum acoustic output is 118.5 dB. The amplifier is Class D with an analogue preamp stage, rated at 300 W RMS and 600 W peak. Its driver is a 254 mm Ultra Long Throw Cerametallic woofer with a spun copper finish. Enclosure type is bass reflex via a front-firing Aerofoil slot port, and enclosure material is MDF. Inputs are a dual RCA/LFE line input and a WA-2 wireless port. Dimensions are 423 x 381 x 634 mm (H x W x D), and weight is 25.7 kg. Finish is ebony vinyl.

Engineering and use context

Klipsch describes the newly designed Cerametallic woofer as light and rigid, with minimal cone breakup and distortion and higher output from less amplifier power. In the amplifier, the analogue preamp design keeps the original signal path, and the Class D output stage is chosen for efficiency. Behind the slot port is a proprietary internal flare geometry that, according to Klipsch, minimises port noise. Woofer and port are both front-firing.

The optional WA-2 kit is a 2.4 GHz wireless link with a range of up to 15 m, and up to four WA-2 kits can run with compatible Klipsch subwoofers in one room. RCA and wireless inputs can be used at the same time, without switching inputs. The amplifier panel has a low pass crossover, a 0/180 degree phase switch and an AUTO/ON/OFF power switch, with standby after 15 - 20 minutes without a signal and a standby draw of 0.5 W. A green LED on the front baffle lights when the amplifier is on and receiving a signal.

Scratch-resistant ebony vinyl covers the entire cabinet. It also has rounded corners, shock-absorbing rubber feet, steel grille posts and a woven cloth grille.

Pairing

The L/LFE input takes the subwoofer output of an AV receiver or processor. A receiver without one connects through its left and right pre-amp outputs to the L/LFE and R inputs. With bass management in the receiver, the low pass knob is set fully clockwise to 160 Hz.

Alternatives

The Klipsch RP-1200SW is the next size up in the Reference Premiere range, with a 305 mm (12 in) Cerametallic woofer.

Specifications

  • Model name

    RP-1000SW

  • Frequency Response low +/- 3dB (Hz)

    19

  • Frequency Response high +/- 3dB (Hz)

    131

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    300 - 600

  • Size (sm)

    42.3 × 38.1 × 63.4

  • Weight (kg)

    25.7

  • Official link