Hifiverse

Subwoofers — SVS Sound PB-3000

Description, images, technical data and specifications

SVS Sound PB-3000
Image source - (c) SVS Sound

The PB-3000 is the ported subwoofer of the SVS 3000 Series and uses technology from the company's 16-Ultra and 4000 Series. It was the first SVS subwoofer with a dual port cabinet and was offered only in Premium Black Ash. SVS no longer has it in stock, and its last listing showed USD 1,499.99 against a regular USD 1,699.99.

Key specs that matter

A front-firing 330 mm high-excursion driver is powered by the Sledge STA-800D2 amplifier, rated at 800 W RMS continuous (2,500 W+ peak dynamic power). Frequency response is 16 - 260 Hz (±3 dB) in standard mode and 18 - 260 Hz (±3 dB) in sealed mode, measured on a 2 m ground plane, quasi-anechoic. With the steel mesh grille the cabinet measures 557 x 465 x 660 mm (H x W x D), or 596 mm deep without it. Unboxed weight is 37.3 kg.

Engineering and use context

SVS designed the driver new for the 3000 Series. It has the first SVS flat edge-wound split-wind voice coil, on a 51 mm polyimide-impregnated fibreglass former. Two dedicated toroidal ferrite magnets form a motor assembly of nearly 11 kg, with an oversized vented U-yoke and top plate of low-carbon 1008 steel and a 6063 aluminium shorting sleeve. Its 1050 aluminium vented cone carries a composite fibre dust cap and an SBR surround and is mounted in an FEA-optimized cast aluminium basket. Four 24-strand silver-plated Litz leads run through a 165 mm two-ply Nomex composite spider to nickel-plated spring terminals.

Two 89 mm ports are sized against port turbulence. Both foam port plugs come in the box, and the DSP holds a separate response curve for standard and for sealed mode. Class D switching in the STA-800D2 uses 25 A, 600 V discrete MOSFETs under a 50 MHz DSP from Analog Devices with double precision 56-bit filtering.

Low pass filter, phase, polarity, room gain, port mode and three parametric EQ bands are set in the SVS Bluetooth app for iOS and Android, which saves three presets. Each change also shows on the rear-panel Intelligent Control Interface with back-lit controls. The MDF cabinet has a double-thick front baffle, internal bracing and acoustic insulation, and it stands on iso-elastomer feet.

Pairing

Stereo RCA inputs and outputs have an input impedance of 16 kohm, for an AV receiver LFE output or the preamplifier outputs of a stereo system. Auto/On and a 3 - 12 V AC/DC trigger are provided, and standby consumption is 0.5 W.

Alternatives

The SVS PB-3000 R|Evolution is the current ported subwoofer of the 3000 Series.

Specifications

  • Model name

    PB-3000

  • Frequency Response low +/- 3dB (Hz)

    16

  • Frequency Response high +/- 3dB (Hz)

    260

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    800

  • Size (sm)

    55.7 X 46.5 X 66.0

  • Weight (kg)

    37.3

  • Official link