Hifiverse

Subwoofers — SVS Sound SB-4000

Description, images, technical data and specifications

SVS Sound SB-4000
Image source - (c) SVS Sound

The SB-4000 is the sealed model of the SVS 4000 Series, next to the ported PB-4000, and uses technology from the 16-Ultra Series. SVS has now retired it and points buyers to the SB-3000 or the 17-Ultra R|Evolution Series. Its last listing was USD 1,399.99 in Piano Gloss Black against a regular USD 1,899.99. Premium Black Ash and Piano Gloss Black were the two finishes.

Key specs that matter

A front-firing 343 mm driver with an overhung motor is driven by the rear-mounted Sledge STA-1200D amplifier, rated at 1200 W RMS continuous (4000+ W peak dynamic power). Frequency response is 19 - 310 Hz (±3 dB), measured quasi-anechoic in a 2 m ground plane. Cabinet dimensions are 465 x 453 x 471 mm (H x W x D) without grille and 530 mm deep with it. Weight is 46.4 kg. Inputs and outputs are stereo XLR and RCA, both at 22 kohms input impedance.

Engineering and use context

SVS optimised this 4000 Series driver for the sealed cabinet. Xmax is 52 mm and Xmech is 76.2 mm. Of the 19.5 kg driver, 17.1 kg is the motor, with two toroidal ferrite magnets, a vented low-carbon steel U-yoke and top plate, and a copper shorting sleeve that SVS says reduces gap inductance and distortion. Its 76 mm edge-wound voice coil uses eight layers of aluminium flat wire. A reinforced, vented paper-composite cone with a laminated glass fibre dust cap is held by a parabolic SBR surround in a cast aluminium, FEA-optimised basket, and 24-strand copper and Nomex leads are woven through the suspension.

Inside the STA-1200D, the Class D switching stage uses 32 A, 600 V MOSFETs. Active power factor correction for 100 - 240 V mains pre-regulates the supply to 360 V DC and allows full output from a standard 15 A circuit, and the input has ground loop isolation. A 50 MHz Analog Devices audio DSP with double-precision 56-bit filtering holds EQ and limiter settings tuned for this sealed cabinet, with a roll-off slope set to use room gain. According to SVS, the sealed box is significantly more compact than ported subwoofers with similar specifications.

The cabinet has a double-thick 51 mm MDF front baffle, internal bracing and acoustic insulation, and a curved steel mesh grille covers the driver. On the front is an Intelligent Feature Control display with a blue 8-digit LED readout that can be dimmed or switched off.

Pairing

Line-level XLR and RCA connections accept consumer and professional audio levels. Power-up is by Auto/On or a 3 - 12 V AC/DC trigger. An IR remote is included, and the Bluetooth app for iOS and Android sets low pass, phase, polarity, room gain and three parametric EQ bands in each of three presets.

Alternatives

The SVS SB17-Ultra R|Evolution is the sealed subwoofer of the series that SVS names as the successor range.

Specifications

  • Model name

    SB-4000

  • Frequency Response low +/- 3dB (Hz)

    19

  • Frequency Response high +/- 3dB (Hz)

    310

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    1200

  • Size (sm)

    46.5 X 45.3 X 47.13

  • Weight (kg)

    46.4

  • Official link