The 3000 Micro is a compact sealed subwoofer from SVS and the micro-sized model of its 3000 Series. It was the first SVS design with two fully active drivers on opposite sides of the cabinet. It has since been superseded by the 3000 Micro R|Evolution, and the original is listed as sold out at USD 699.99 against a regular USD 899.99, in Piano Gloss Black and Piano Gloss White.
Key specs that matter
Two 203 mm drivers are mounted in a dual opposing layout and wired in parallel. Power comes from a Sledge STA-800D2 amplifier rated at 800 W RMS continuous (2,500 W+ peak dynamic power). Frequency response is 23 - 240 Hz (±3 dB), measured on a 2 m ground plane, quasi-anechoic. Each driver allows 24 mm Xmax and 37 mm Xmech. With grilles the cabinet measures 278 x 297 x 271 mm (H x W x D), and it weighs 10.2 kg.
Engineering and use context
Because the two drivers work in opposite directions, the mechanical energy transferred to the cabinet is cancelled, and SVS states this stops a small subwoofer from walking across the floor. Each driver has an 1100 aluminium single-piece cone and junction with a composite fibre dust cap, a progressive inverted NBR surround and an overhung motor with an oversized Y30 ferrite magnet. Its 4-layer copper voice coil is wound on a 5025-H18 aluminium former, with a 127 mm poly-cotton spider, a 6061 aluminium shorting ring and a low-carbon 1010 steel top plate and U-yoke.
Inside the STA-800D2, a Class D switching stage uses 25 A, 600 V discrete MOSFETs. Control is by a 50 MHz DSP from Analog Devices, which uses double precision 56-bit filtering and multi-band limiters, and the roll-off slope is shaped for in-room gain. Low pass filter, phase, polarity, room gain and three parametric EQ bands are adjustable from the SVS Bluetooth app for iOS, Android and Amazon devices, which stores three presets and mirrors every change on the rear-panel Intelligent Control Interface. That interface has a blue LED light bar and push-button controls, and a USB port on it powers the optional SoundPath Wireless Audio Adapter.
Structurally reinforced MDF is used for the cabinet, with extra-thick side baffles, internal bracing and acoustic absorption. Two steel mesh grilles and iso-elastomer screw-in feet are included.
Pairing
Stereo RCA inputs and outputs have an input impedance of 16 kohm, for an AV receiver LFE output or a preamplifier output. Auto/On and a 3 - 12 V AC/DC trigger are provided, and standby consumption is 0.5 W.
Alternatives
The SVS 3000 Micro R|Evolution is the successor sealed subwoofer, with dual opposing 229 mm drivers.