Hifiverse

Floorstanding loudspeakers - Avalon Acoustics Tesseract Signature

Description, images, technical data and specifications

Avalon Acoustics Tesseract Signature
Image source - (c) Avalon Acoustics

The Tesseract Signature is a model of the Signature series from Avalon Acoustics, the American maker of high-resolution reference transducers. It is a passive floorstanding loudspeaker with an internally powered bass section, and Avalon presents it as the culmination of more than 30 years of research. Each channel consists of two independent cabinets, vertically integrated into one array.

Key specs that matter

Frequency response is 16 Hz - 100 kHz (±0.5 dB anechoic, ±1 dB in room typical), with in-room output at -3 dB at 13 Hz. Efficiency is 93.5 dB (1 W/1 m). Impedance is 6 ohms nominal, 4 ohms minimum at 80 Hz. Recommended amplifier power is 15 - 500 W. Harmonic distortion is 0.30% throughout the bandwidth at rated efficiency, and inter-driver phase deviation is 3 degrees within all crossover bands. Group delay is under 3 ms from 16 Hz to 100 Hz and under 1 ms from 100 Hz to 20 kHz. Each channel uses four 381 mm subwoofers, a 279 mm ceramic/honeycomb midbass, a 114 mm ceramic midrange and a 20 mm diamond tweeter. Dimensions are 2,210 x 740 x 820 mm (H x W x D), and each channel weighs 375 kg.

Engineering and use context

Avalon uses a proprietary quad-driver isobaric transmission line with its own amplification, rated at 4.5 kW peak per channel. Its four subwoofers are low-Q, high-force-factor units. Automatic signal sensing and gain matching are built in, and a master gain control covers ±2.5 dB in 0.25 dB steps set by fixed resistors. A toggle switch selects the low-frequency contour, Maximum Extension or Transient Speed. This bass circuit is fully analogue and symmetrical, with tempered-scale aperiodic tuning and no digital conversion.

All three upper drivers have underhung voice coils. Avalon's design goals include symmetrical impedance characteristics, constant driver-to-driver Q, pistonic driver behaviour, point source focus, phase-linear filter topologies and a fully damped, non-reactive amplifier load. Cabinets are of Silent Inert Composite construction. Stealth Technology provides acoustic radiation control for the launch surface and for ambient energy returned from the room. According to Avalon, the cabinet forms are predicted with tensor field mathematics, which assigns a value and direction to expanding harmonic waves.

Pairing

A stereo or mono power amplifier within the recommended range is required for the passive sections. Mains power is required for the bass amplification.

Alternatives

The Isis Signature is another floorstanding loudspeaker in Avalon's Signature series.

Specifications

  • Model name

    Tesseract Signature

  • Frequency Response low +/- 3dB (Hz)

    16

  • Frequency Response high +/- 3dB (Hz)

    100000

  • Sensitivity (dB at 1 W/1m)

    93.5

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    15 - 500

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    5400 bass

  • Size (sm)

    221 x 74 x 82

  • Weight (kg)

    375

  • Official link

More components