Hifiverse

Floorstanding loudspeakers - Peak Consult Sonora

Description, images, technical data and specifications

Peak Consult Sonora
Image source - (c) Peak Consult

The Sonora is the entry model of the Peak Consult loudspeaker range from Middelfart, Denmark. Per Kristoffersen founded the company in 1996, and since 2021 it has been owned by Lennart Asbjørn Jensen and Wilfried Ehrenholz, the co-founder of Dynaudio. Peak Consult describes the Sonora as a slim two-way floorstanding loudspeaker with the footprint of a stand-mount, built with the same manufacturing methods, drive units and component quality as the larger models. Pricing was GBP 23,000, USD 25,000 or EUR 25,000 per pair.

Key specs that matter

Design is two-way with a 230 mm passive bass radiator on the rear. A 26 mm silk soft dome tweeter is combined with a Peak mid/bass driver, and the crossover frequency is 2.5 kHz. Sensitivity is 85 dB (1 W/1 m). Nominal impedance is 4 ohms, with PLIC (Peak Linear Impedance Control). Each speaker measures 1130 x 280 x 385 mm (H x W x D) and weighs 68 kg.

Engineering and use context

Peak's proprietary tweeter is made by hand in Denmark, and pairs are matched to within 0.1 dB. Its textile dome sits in a roll surround with a rear chamber, and the magnet system uses six neodymium magnets. Peak quotes a flat frequency response beyond 30 kHz. On the mid/bass unit the cone is a one-piece sandwich moulding, the diecast basket carries an internal magnet system, and the Kapton voice coil uses aluminium wire with Hexacoil winding.

Several layers of HDF form the cabinet walls, laminated with a foam vibration-damping glue that never hardens, and wall thickness across the range is 36 to 50 mm. Inside are calculated bracing points, and four different adhesives are used in each cabinet. Outside is a 14 mm layer of solid hardwood and acrylic.

Crossover parts are hardwired without PCBs on two MDF boards, one for HF and one for LF, and are mounted with damping glue. Both boards sit in a dedicated sealed chamber filled with dry 0.3 - 1.0 mm sand against microphonic effects and heat. PLIC equalises the impedance into a flat curve. Four stainless steel feet with double O-ring decoupling and internal ceramic ball bearings carry the weight, and the terminals are Argento. Finishes are Ash, Walnut and Wenge hardwood at no cost, or Midnight Black and Pure White acrylic, and the warranty is 5 years for the original owner.

Pairing

According to Peak Consult, PLIC gives compatibility with a wide range of amplifiers regardless of their power rating. Bi-wire terminals are available on special order at no cost.

Alternatives

The Peak Consult Sinfonia is the three-way ported floorstanding model above it, with a 110 mm midrange unit and a 200 mm bass driver.

Specifications

  • Model name

    Sonora

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    85

  • Impedance (Ohms)

    7

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    113 x 28 x 38.5

  • Weight (kg)

    68

  • Official link

More components