Hifiverse

Floorstanding loudspeakers - Peak Consult Sinfonia

Description, images, technical data and specifications

Peak Consult Sinfonia
Image source - (c) Peak Consult

The Sinfonia is a three-way floorstanding loudspeaker from Peak Consult of Middelfart, Denmark. Per Kristoffersen founded the company in 1996, and in 2021 it was bought by Lennart Asbjørn Jensen and Wilfried Ehrenholz, the co-founder of Dynaudio. In the current range the Sinfonia sits above the Sonora and below El Diablo, SunFyre and Dragon Legacy. The European price was EUR 45,000 per pair, and the North American price USD 58,900.

Key specs that matter

Design is three-way ported. The driver complement is a 26 mm silk soft dome tweeter, a dedicated 110 mm midrange unit and a custom 200 mm bass driver. Crossover frequencies are 450 Hz and 3.1 kHz. Sensitivity is 89 dB (1 W/1 m). Nominal impedance is 5 ohms ±1 ohm, with PLIC (Peak Linear Impedance Control). Each speaker measures 1140 x 300 x 460 mm (H x W x D) and weighs 78 kg.

Engineering and use context

Peak's proprietary tweeter is made by hand in Denmark, and pairs are matched to within 0.1 dB. It has a textile dome diaphragm, a roll surround, a rear chamber and a magnet system with six neodymium magnets, and Peak quotes a flat frequency response beyond 30 kHz. Both cone drivers use a one-piece sandwich moulded cone, a diecast basket with an internal magnet system and a Kapton voice coil with aluminium wire in Hexacoil winding.

Its cabinet is built from multiple laminated layers of HDF bonded with a foam vibration-damping glue that never hardens, and wall thickness across the range is 36 to 50 mm. Inside are calculated bracing points, and four different adhesives are used in each cabinet. A 14 mm layer of solid hardwood and acrylic forms the outer skin, with piano-polished black acrylic side panels. Craftsmen in the Danish workshop spend more than 80 hours on every pair.

Crossover components are hardwired without PCBs on three MDF boards for HF, MF and LF, and each driver section has its own network. All parts are mounted with damping glue. The crossover sits in a sealed chamber in the base, filled with 0.3 - 1.0 mm sand against microphonic effects and heat buildup. PLIC equalises the impedance into a flat curve. Four stainless steel feet with double O-ring decoupling and internal ceramic ball bearings carry the cabinet, and connections go through Argento terminals. Ash, Walnut and Wenge are no-cost finishes, full acrylic is a special order at a 5% surcharge, and the warranty is 5 years for the original owner.

Pairing

According to Peak Consult, PLIC gives compatibility with a wide range of amplifiers regardless of their power rating. Bi-wire terminals are available on special order at no cost.

Alternatives

The Peak Consult El Diablo is the three-way double bass ported floorstanding model above it, with crossover points at 350 Hz and 2.4 kHz.

Specifications

  • Model name

    Sinfonia

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    89

  • Impedance (Ohms)

    5

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    114 x 30 x 46

  • Weight (kg)

    78

  • Official link

More components