The SCM19A is the two-way active floorstanding loudspeaker of the ATC Entry Series, which comprises four passive and two active systems. ATC designs and builds its own drive units and amplifiers, and in the SCM19A the bi-amplifier pack is part of the cabinet. The UK price was GBP 4,990.
Key specs that matter
Drive units are an ATC 25 mm dual suspension soft dome tweeter and a 150 mm SL mid/bass driver with a 75 mm integral soft dome. The crossover frequency is 2.5 kHz. Frequency response is 54 Hz - 22 kHz (-6 dB), and matched response is ±0.5 dB. Dispersion is ±80° horizontal and ±10° vertical, both coherent. Maximum SPL is 108 dB. An on-board grounded source class A/B bi-amplifier delivers 182 W in total - 150 W LF and 32 W HF. Each cabinet measures 980 x 370 x 344 mm (H x W x D) including the foot plinth and amplifier, and weighs 31 kg. Spikes add 25 mm to the height and the grille 34 mm to the depth.
Engineering and use context
Its tweeter is the SH25-76, a new ATC design that the Entry Series introduced. It sits in a precision alloy waveguide, and its dual suspension system suppresses diaphragm rocking modes at high output levels. The mid/bass driver uses a 9 kg short-coil, long-gap motor assembly. ATC identifies magnetic hysteresis as a significant source of distortion in drive units, and quotes a 10 - 15 dB reduction in third harmonic distortion between 100 Hz and 3 kHz for its SL drivers. Voice coils are edgewise wound OFHC copper ribbon in a precision machined magnetic gap, and the short coil in a long gap needs no ferrofluid. A hole through the pole vents air from under the dust cap.
The active filters are second order critically damped with phase compensation. Overload protection is by active FET momentary gain reduction. A DC fault protection circuit and a thermal trip report through a fault LED on the rear panel. Four M8 x 1.25 mm spikes come with each cabinet. Finishes are cherry or black ash veneer and satin black or satin white paint. The warranty runs for six years.
Pairing
Input is a female XLR with 1 V sensitivity, so a source or preamplifier with a balanced output is required. ATC lists the CA2 preamplifier and the CDA2 CD player, preamplifier and DAC as partnering electronics. No power amplifier or speaker cables are needed.
Alternatives
The ATC SCM40A is the other active model of the Entry Series, a three-way floorstanding loudspeaker with a separate 75 mm soft dome midrange.