Hifiverse

Floorstanding loudspeakers — ATC SCM100SE

Description, images, technical data and specifications

ATC SCM100SE
Image source - (c) ATC

The SCM100SE is the Special Edition version of the ATC SCM100, a three-way floorstanding loudspeaker offered in active and passive form. ATC was founded in London in 1974 by Bill Woodman and now builds its drive units and electronics at Stroud in Gloucestershire. Its SE Series is a limited edition line of hand-built three-way models - the SCM50SE, SCM100SE and SCM150SE. The UK price was GBP 31,250 in satin lacquer or GBP 36,083 in high gloss.

Key specs that matter

Drive units are the SH25-76S 25 mm soft dome tweeter, the SM75-150S 75 mm soft dome midrange and the SB75-314SL 314 mm bass driver. Crossover frequencies are 380 Hz and 3.5 kHz. Frequency response is 65 Hz - 17 kHz (-2 dB) and 32 Hz - 25 kHz (-6 dB), and matched response is ±0.5 dB. Dispersion is ±80° horizontal and ±10° vertical, both coherent. Maximum SPL is 115 dB. In the active version the amplifier output is 200 W LF, 100 W mid and 50 W HF, and each speaker measures 1150 x 419 x 585 mm (H x W x D) and weighs 79 kg. The passive version has a sensitivity of 88 dB (1 W/1 m), measures 1150 x 419 x 592 mm and weighs 74 kg.

Engineering and use context

ATC designed and built the SH25-76S tweeter new for the SE Series. Its SM75-150S midrange was first produced in 1976. The SB75-314SL bass driver has a short voice coil in a long magnetic gap and uses ATC's super linear magnet technology for linearity and power handling.

Each drive unit has its own fully discrete amplifier, and the three are combined into a 350 W tri-amplifier with active crossover filters, phase correction and overload protection. All filters are active. ATC quotes a 20 dB improvement in intermodulation distortion for its active systems against passive ones.

Both versions use a limited edition curved cabinet with a vertical metal inlay in PVD dull nickel. Rear venting and input panels are acid etched and PVD dull nickel coated, and each is individually numbered. A top brow detail is offered in three versions - black acrylic centre with red acrylic horns, veneered centre with dull nickel horns, or black acrylic centre with black acrylic horns. Veneers include Cherry, Walnut, Oak, Black Ash, Rosewood, Burr Walnut, Pippy Oak and Burr Magnolia, and satin black, satin white, piano black and piano white are also listed. Warranty is six years.

Pairing

The active version has a female XLR input, so a preamplifier with a balanced output is required. ATC lists the SCA2 as the partnering preamplifier. The passive version requires a power amplifier of 100 - 1500 W.

Alternatives

The ATC SCM150SE is the larger three-way floorstanding model of the same Special Edition series, with a 375 mm bass driver.

Specifications

  • Model name

    SCM100SE

  • Frequency Response low +/- 3dB (Hz)

    32 (-6dB)

  • Frequency Response high +/- 3dB (Hz)

    25 000 (-6dB)

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    50 + 100 + 200

  • Size (sm)

    115.0 x 41.9 x 58.5

  • Weight (kg)

    79

  • Official link

More components