The SCM300ASLT is the active version of the SCM300 in the ATC Tower Series. Its electronics are not housed in the cabinet - each speaker is driven by an outboard P4 filter and amplifier unit. A passive SCM300PSLT with tri-wire binding posts is also available. In the UK the active pair starts at GBP 52,000 and rises to GBP 61,500 depending on finish.
Key specs that matter
Each cabinet carries a 25 mm Dual-Suspension S-Spec soft dome tweeter, a 75 mm Super Dome midrange and two 375 mm SL bass drivers, with crossover frequencies at 380 Hz and 3.5 kHz. Amplifier output is 275 W + 275 W for the bass drivers, 200 W for the midrange and 100 W for the tweeter, 850 W per speaker. Amplitude linearity is 50 Hz - 12 kHz (±2 dB), and cut-off frequencies are 25 Hz and 20 kHz (-6 dB, free-standing). Maximum continuous SPL is 121 dB at 1 m. Dispersion is ±80° horizontal and ±10° vertical, coherent. Input is a female XLR with 2 V sensitivity and a balanced impedance above 10 kohms. Each speaker measures 1500 x 500 x 580 mm (H x W x D) and weighs 96 kg, with a 6-year warranty.
Engineering and use context
ATC lists the P4 as a rack-mount 4-way grounded source amplifier. It contains the three-way active filters and four power amplifiers - two for the bass drivers, one for the midrange and one for the tweeter - and can be located remotely from the speakers, one P4 per speaker. A single custom eight-way speaker cable links each cabinet to its P4, 5 m cables are supplied as standard and lengths up to 10 m are available. Filters are even order and critically damped. Overload protection combines active FET momentary gain reduction with thermal tweeter protection. According to the P4 manual, the unit is cooled by forced ventilation with fans, air intake at the rear and exhaust at the front, is 5U high for rack mounting and weighs 40 kg. A 5-pin interface socket allows active and standby control from external systems.
For comparison, the passive SCM300PSLT is rated at 93 dB/W at 1 m and 8 ohms nominal, with 2nd order passive critically damped filters and 120 dB maximum continuous SPL. Standard finishes are cherry, walnut, oak and black ash veneer or satin black and satin white paint. Rosewood, European crown cut walnut, pippy oak, burr magnolia and burr poplar veneers, clear high gloss veneer, piano black and piano white carry a surcharge.
Pairing
A preamplifier or source with a variable balanced output is required. One P4 is needed for each speaker, so a stereo pair uses two units. ATC lists the CDA2 CD player, preamplifier and DAC and the CA2 and SCA2 preamplifiers as partner electronics.
Alternatives
The ATC SCM200ASLT is the smaller active tower of the series, using the same P4 amplifier with two 314 mm bass drivers.