Hifiverse

Floorstanding loudspeakers — ATC SCM150ASLT

Description, images, technical data and specifications

ATC SCM150ASLT
Image source - (c) ATC

The SCM150ASLT is a three-way active floorstanding loudspeaker in ATC's Tower Series, made at the company's factory at Aston Down in Gloucestershire. Tower models run from the SCM20ASLT to the SCM300ASLT, and this one sits between the SCM100ASLT and the SCM200ASLT. A passive version is also offered. ATC also built the SCM150ASLT LE, a limited edition of 22 pairs with the electronics moved to a separate six-channel P6 amplifier.

Key specs that matter

Drivers are a 25 mm neodymium HF unit, the ATC SM75-150 S 75 mm soft dome midrange and the latest 375 mm SL-specification bass driver. A 350 W class AB tri-amp pack supplies 200 W LF, 100 W Mid and 50 W HF. Crossover frequencies are 380 Hz and 3.5 kHz. Frequency response is 60 Hz - 17 kHz (±2 dB) and 25 Hz - 22 kHz (±6 dB). Matched response is ±0.5 dB, and maximum SPL is 117 dB. Dispersion is ±80° horizontal and ±10° vertical, both coherent. Cabinet dimensions are 1104 x 495 x 635 mm (H x W x D), and each speaker weighs 77 kg.

Engineering and use context

All filters are active. ATC's manual for the SCM150 family gives them as 4th order, critically damped, with phase compensation, and the three-way amplifier has frequency, gain and phase correction individually optimised at the ATC factory. Behind the 375 mm cone is a massive ATC motor assembly. Overload protection uses active peak momentary gain reduction on all channels and an r.m.s. power limiter on the HF channel.

On the rear panel are the mains inlet, a power switch with indicator, a fuseholder and the signal input. Input sensitivity is 1 V rms (0 dBV/1.1 dBu) balanced for full output, with 10 kohms per leg. Each speaker has a sensitivity trim from 0 to -6 dB and a bass boost from 0 to +6 dB at 40 Hz, both continuously variable. Mains voltage is internally set to 100, 115 or 220 - 230 V (50/60 Hz). In the Classic Series the SCM150ASL is the same three-way active design in an 884 x 498 x 647 mm cabinet weighing 75 kg. Standard veneers are black ash, mahogany, cherry and natural oak, other veneers are made to order, and the warranty is 6 years.

Pairing

The XLR input requires a preamplifier, DAC or streamer with balanced variable line outputs. Unbalanced connection is possible, but ATC prefers balanced XLR-to-XLR cables. No external power amplifier is needed. Each speaker requires a mains cable and a signal cable.

Alternatives

The ATC SCM100ASLT is the smaller active three-way tower in the same series, with a 314 mm SL bass driver and 115 dB maximum SPL.

Specifications

  • Model name

    SCM150ASLT

  • Frequency Response low +/- 3dB (Hz)

    25 (±6dB)

  • Frequency Response high +/- 3dB (Hz)

    22 000 (±6dB)

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    50 + 100 + 200

  • Size (sm)

    110.4 x 49.5 x 63.5

  • Weight (kg)

    77

  • Official link

More components