Hifiverse

Floorstanding loudspeakers — Klipsch RP-8000F II

Description, images, technical data and specifications

Klipsch RP-8000F II
Image source - (c) Klipsch

The RP-8000F II is a two-way floorstanding loudspeaker in the second generation of the Klipsch Reference Premiere series, intended for stereo systems and home cinema. It shares its main drivers with the RP-8060FA II Dolby Atmos model. Klipsch designs and engineers the series in Indianapolis. Two finishes are offered, ebony vinyl and walnut vinyl, both with satin painted baffles and a scratch-resistant finish.

Key specs that matter

High frequencies come from a 25 mm (1 in.) titanium LTS vented tweeter with a hybrid cross-section expanded Tractrix horn. Below it are dual 203 mm (8 in.) Cerametallic cone woofers with Faraday rings, and the crossover frequency is 1630 Hz. Frequency response is 35 Hz - 25 kHz (±3 dB). Sensitivity is 98 dB (2.83 V/1 m, half-space anechoic), nominal impedance is 8 ohms, and power handling is 150 W continuous, 600 W peak. The internally braced MDF enclosure is bass reflex via dual-chamber rear-firing Tractrix ports. Inputs are dual aluminium binding posts for bi-wire or bi-amp use, with Dolby Atmos passthrough. Each speaker measures 1095 x 275 x 463 mm (H x W x D) and weighs 27.85 kg.

Engineering and use context

Klipsch uses a 90 x 90 degree silicone composite hybrid Tractrix horn, and in the second generation the horn is larger. A phase plug and compression-moulded silicone face ensure a smooth frequency response. According to Klipsch, Linear Travel Suspension on the titanium diaphragm minimises distortion, while the vented tweeter housing reduces standing waves that create unwanted harmonics.

Both Cerametallic woofers are an all-new design with rigid, lightweight cones. New aluminium shorting rings reduce distortion, and a new motor structure comes with increased power handling. Each Tractrix port has custom-designed inner flares that reduce air turbulence entering the port and lower port noise. Inside, additional bracing and a divided cabinet minimise cabinet resonances and vibration.

Cast aluminium feet minimise the surface area in contact with the floor and decouple the speaker. A removable grille attaches magnetically. On the back, hidden connections for a Dolby Atmos elevation speaker reduce visible wiring.

Pairing

The terminals allow bi-wiring or bi-amping. A stereo amplifier or AV receiver rated into 8 ohms is required. The matching Dolby Atmos elevation speaker is the RP-500SA, connected through the Atmos passthrough.

Alternatives

The RP-8060FA II has the same main-channel drivers and adds a 165 mm (6.5 in.) two-way up-firing Dolby Atmos module in the top of the cabinet.

Specifications

  • Model name

    RP-8000F II

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    25000

  • Sensitivity (dB at 1 W/1m)

    98

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    150 - 600

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    109.5 × 27.5 × 46.3

  • Weight (kg)

    27.85

  • Official link

More components