Hifiverse

Floorstanding loudspeakers — Klipsch RP-8060FA II

Description, images, technical data and specifications

Klipsch RP-8060FA II
Image source - (c) Klipsch

The RP-8060FA II is a Dolby Atmos floorstanding speaker from the second-generation Klipsch Reference Premiere series. A 165 mm (6.5 in.) two-way up-firing Dolby Atmos speaker is integrated into the top of the full-range tower, and the main channel uses the drivers of the RP-8000F II. One pair therefore covers the front left and right channels and two height channels. Finishes are ebony vinyl and walnut vinyl with satin painted baffles.

Key specs that matter

In the main channel a 25 mm (1 in.) titanium LTS vented tweeter with a hybrid cross-section expanded Tractrix horn works with dual 203 mm (8 in.) Cerametallic cone woofers with Faraday rings, crossed over at 1630 Hz. Main-channel frequency response is 35 Hz - 25 kHz (±3 dB) and sensitivity is 98 dB (2.83 V/1 m, half-space anechoic). Power handling is 150 W continuous, 600 W peak. Its internally braced MDF enclosure is bass reflex via dual-chamber rear-firing Tractrix ports.

For the height channel Klipsch combines a 25 mm titanium LTS tweeter on a hybrid Tractrix horn with a 165 mm Cerametallic cone woofer, crossed over at 2 kHz, in an MDF acoustic suspension enclosure. Its power handling is 100 W continuous, 400 W peak, and frequency response and sensitivity conform to Dolby Atmos specifications. Both channels are rated at 8 ohms nominal. Each speaker measures 1095 x 275 x 528 mm (H x W x D) and weighs 34.35 kg.

Engineering and use context

According to Klipsch, horn loading focuses high frequencies towards the listening area. The 90 x 90 degree silicone composite horn is larger than in the first generation, and its phase plug and compression-moulded silicone face give a smooth frequency response. Linear Travel Suspension minimises distortion, and a vented tweeter housing reduces standing waves that create unwanted harmonics.

Cerametallic woofers in both channels are a redesigned version with rigid, lightweight cones. In the main channel, new aluminium shorting rings reduce distortion, and the woofers have a new motor structure and increased power handling. Custom-designed inner flares in each Tractrix port reduce air turbulence and port noise. Additional bracing and a divided cabinet minimise cabinet resonances and vibration.

All speaker terminals are placed low on the cabinet. Cast aluminium feet minimise floor contact and decouple the speaker, and the grille attaches magnetically.

Pairing

An AV receiver or processor with Dolby Atmos decoding and two height-channel outputs is required. The main-channel terminals allow bi-wiring or bi-amping, and the height channel has single binding posts.

Alternatives

The RP-8000F II is the same tower without the height module, with Dolby Atmos passthrough terminals for an add-on elevation speaker.

Specifications

More components