The RP-6000F II is a passive floorstanding speaker from the second generation of the Klipsch Reference Premiere series, which Klipsch positions for home theater and hi-fi listening. It replaces the original RP-6000F. Finishes are ebony vinyl and walnut vinyl, both with satin-painted baffles and a scratch-resistant finish.
Key specs that matter
This is a two-way design with a 25 mm titanium LTS vented tweeter on a hybrid cross-section expanded Tractrix horn and dual 165 mm Cerametallic cone woofers with Faraday rings. Crossover frequency is 1.77 kHz. Frequency response is 38 Hz - 25 kHz (±3 dB). Sensitivity is 96 dB (2.83 V/1 m, half-space anechoic, in-room). Nominal impedance is 8 ohms. Power handling is 125 W continuous and 500 W peak. The enclosure is internally braced MDF, bass reflex via dual chamber rear Tractrix ports. Dimensions are 1006 x 236 x 446 mm (H x W x D), and weight is 22.4 kg.
Engineering and use context
For the second generation the horn grew to a larger 90 x 90 degree silicone composite hybrid Tractrix horn. It has a phase plug and a compression-molded silicone face. Behind the Linear Travel Suspension (LTS) titanium diaphragm, the tweeter housing is vented to reduce standing waves. According to Klipsch, the LTS minimizes distortion.
Both Cerametallic woofers are a new design, with rigid and lightweight cones, new aluminum shorting rings and a new motor structure. These shorting rings reduce distortion and increase power handling.
Inside the cabinet, additional bracing and a divided cabinet minimize resonance and vibration. Each Tractrix port has a custom-designed inner flare that reduces air turbulence entering the port, and with it port noise. Cast aluminum feet have less resonance than MDF or ABS plastic feet and minimize the surface area in contact with the floor, decoupling the speaker.
A new input panel has audiophile-grade wire and dual aluminum binding posts. Hidden connections on the back accept the RP-500SA Dolby Atmos elevation speakers, and jumper wires are included in the box. The grille is flexible, removable and attaches magnetically.
Pairing
A stereo amplifier or AV receiver rated for 8 ohm loads is required. The terminals allow bi-wiring, or bi-amping with outboard crossovers and separate power amplifiers.
Alternatives
The RP-5000F II is the smaller Reference Premiere II floorstanding speaker, with dual 133 mm Cerametallic woofers and 95 dB sensitivity.