Hifiverse

Floorstanding loudspeakers — Klipsch RP-5000F II

Description, images, technical data and specifications

Klipsch RP-5000F II
Image source - (c) Klipsch

The RP-5000F II is a two-way floorstanding speaker in the second generation of the Klipsch Reference Premiere series, placed below the RP-6000F II. It combines a titanium LTS tweeter on a hybrid Tractrix horn with two Cerametallic woofers in an MDF cabinet. Finishes are Ebony and Walnut vinyl, both with a satin painted baffle.

Key specs that matter

Enclosure type is bass reflex via dual chamber rear-firing Tractrix ports. The high-frequency driver is a 1-inch (25 mm) titanium LTS vented tweeter with a hybrid cross-section expanded Tractrix horn. Dual 5.25-inch (133 mm) Cerametallic cone woofers with Faraday rings cover the low frequencies. Crossover frequency is 1,900 Hz. Frequency response is 40 Hz - 25 kHz (±3 dB), and sensitivity is 95 dB (2.83 V/1 m, in-room). Nominal impedance is 8 ohms compatible, with power handling of 100 W continuous and 400 W peak. Dimensions are 917 x 207 x 375 mm (H x W x D), and weight is 17.55 kg.

Engineering and use context

Klipsch describes the horn as a 90° x 90° silicon composite hybrid Tractrix horn. A phase plug and a compression-moulded silicon face are part of it, and the second generation has a larger horn. Linear Travel Suspension is used on the tweeter, and according to Klipsch it minimises distortion. Its tweeter housing is vented to reduce standing waves.

Cerametallic woofers are a signature feature of Reference Premiere. In this all-new design the Faraday rings are aluminium shorting rings, and the motor structure is new. The ports use Tractrix geometry with custom inner flares that reduce air turbulence entering the port.

Inside, the MDF enclosure has additional bracing and is divided into two chambers to minimise cabinet resonances. Cast aluminium feet minimise the contact area with the floor and decouple the speaker. A removable grille attaches magnetically. On the input panel are dual aluminium binding posts, and the hidden Dolby Atmos passthrough connections on the back hold the cables in place.

Pairing

An amplifier rated for 8 ohm loads is required. The dual binding posts allow bi-wiring or bi-amping. Its Atmos passthrough allows a Dolby Atmos elevation speaker to be added on top.

Alternatives

The RP-8000F II is the larger floorstanding speaker of the Reference Premiere series, with dual 8-inch woofers.

Specifications

  • Model name

    RP-5000F II

  • Frequency Response low +/- 3dB (Hz)

    40

  • Frequency Response high +/- 3dB (Hz)

    25000

  • Sensitivity (dB at 1 W/1m)

    95

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    100 - 400

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    91.7 × 20.7 × 37.5

  • Weight (kg)

    17.55

  • Official link

More components