The F208 is a floorstanding loudspeaker in Revel's Performa3 series. Revel describes the Performa3 floorstanding models as full-range loudspeakers with small footprints, and the F208 is housed in an enclosure similar to that of the flagship Ultima2 Series. Finishes are high-gloss Piano Black and High Gloss Walnut in genuine American walnut veneer, applied in a process developed and overseen by Italian cabinet makers.
Key specs that matter
Its driver complement is a 25 mm (1 in.) aluminium tweeter with an acoustic lens waveguide, a 133 mm (5.25 in.) aluminium cone cast-frame midrange and two 20 cm (8 in.) aluminium cone cast-frame woofers. Crossover frequencies are 270 Hz and 2200 Hz. The enclosure is bass reflex with a front port. Low-frequency extension is 31 Hz (-3 dB), 27 Hz (-6 dB) and 23 Hz (-10 dB). Sensitivity is 88.5 dB, and nominal impedance is 8 ohms. Recommended amplifier power is 50 - 350 W RMS. Dimensions are 1182.5 x 341.8 x 375.3 mm (H x W x D), net weight is 36 kg, and the input panel has dual sets of binding posts.
Engineering and use context
Both the woofers and the midrange have distortion reduction mechanisms that stabilise the flux field during operation. Their ribbed aluminium cones are designed for piston-like behaviour, and Revel uses cast aluminium frames to remove another source of resonances. The low-frequency port is designed with fluid modelling and has identical flares on both ends. According to Revel, this port minimises dynamic compression and port-generated noise.
A newly designed motor and dome assembly is used in the tweeter. Revel bases its integrated acoustic lens waveguide on a mathematical approach that matches the dispersion of the tweeter to that of the midrange in the crossover region. This waveguide also increases the dispersion of the tweeter at higher frequencies.
Fully curved enclosures are formed from contiguous wood layers that prevent splitting, and Revel states that this shape is inherently stiffer than a conventional box. Inside, the cabinet has strategically oriented bracing. Grilles are designed to minimise diffraction and use a magnetic attachment, so no grille hardware is visible on the baffle.
Pairing
A stereo amplifier or a pair of monoblocks within Revel's recommended power range is required. The terminals allow bi-wiring or passive bi-amping.
Alternatives
The F206 is the smaller floorstanding loudspeaker in Revel's Performa3 series.