Hifiverse

Floorstanding loudspeakers - Revel F206

Description, images, technical data and specifications

Revel F206
Image source - (c) Revel

The F206 is a three-way floorstanding tower loudspeaker in Revel's Performa3 series, the smaller of the two Performa3 towers alongside the F208. Revel, part of Harman International, describes the Performa3 towers as full-range loudspeakers with small footprints. During development every Revel model is compared with competing models in the company's position-independent double-blind listening lab.

Key specs that matter

Enclosure type is bass reflex with a front-firing port. Drive units are a 25 mm (1 in) aluminium tweeter with acoustic lens waveguide, a 133 mm (5.25 in) aluminium cone cast-frame midrange and two 165 mm (6.5 in) aluminium cone cast-frame woofers. Crossover frequencies are 275 Hz and 2,150 Hz. Low-frequency extension is 52 Hz (-3 dB), 40 Hz (-6 dB) and 33 Hz (-10 dB). Sensitivity is 88 dB (2.83 V/1 m) and nominal impedance is 8 ohms. Recommended amplifier power is 50 - 200 W. Dimensions are 1052 x 249 x 347 mm (H x W x D), and weight is 26 kg.

Engineering and use context

Midrange and woofers have motor systems with distortion reduction mechanisms that stabilise the flux field during operation. Their ribbed aluminium cones are specified by Revel for piston-like behaviour, and the frames are cast aluminium. The tweeter uses a newly designed motor and dome assembly. Its acoustic lens waveguide matches tweeter dispersion to that of the midrange in the crossover region and increases dispersion at higher frequencies. High-order crossover networks are used to reduce distortion and dynamic compression.

According to Revel, the low-frequency port is a fluid-model design with identical flares on both ends, against dynamic compression and port noise. Its front-firing location widens the installation options. The fully curved enclosure is similar to that of the Ultima2 series, formed from contiguous wood layers with 25 mm thick panels and strategically oriented internal bracing. Its finishing process was developed and is overseen by Italian cabinet makers, and the finishes are Piano Black, Piano White and High Gloss Walnut. Grilles attach magnetically, with no hardware on the baffle. Each speaker comes with four adjustable spikes with locking rings, usable with the pointed or the round end out, and a pair of foam port plugs is included.

Pairing

An amplifier within Revel's recommended power range is required. The gold-plated binding posts allow single-wire connection only and accept spade lugs.

Alternatives

The F208 is the larger Performa3 tower, with dual 200 mm woofers and bi-wire terminals.

Specifications

More components