The Elysian 4 is the larger three-way floorstanding loudspeaker in Wharfedale's Elysian series, which the company presents as its luxury range. Elysian combines a piano-lacquer cabinet with AMT (Air Motion Transformer) high-frequency transducers and European-manufactured bass drivers. Finishes are Piano Black, Piano Walnut and Piano White.
Key specs that matter
Enclosure type is bass reflex. Drive units are a 27 x 90 mm AMT, a 150 mm (6 in) midrange and two 220 mm (8.5 in) bass drivers, all cones being coated fibre glass matrix. Crossover frequencies are 340 Hz and 3.1 kHz. Frequency response is 30 Hz - 22 kHz (±3 dB), with bass extension to 24 Hz (-6 dB). Sensitivity is 92 dB (2.83 V/1 m) and peak SPL is 110 dB. Nominal impedance is 4 ohms (8 ohms compatible), minimum 3.2 ohms, and recommended amplifier power is 15 - 250 W. Internal volumes are 38 litres and 79.4 litres. Each speaker is 1188 mm high on its plinth, 402 mm wide and 432 mm deep plus 30 mm for the terminals, and weighs 49.5 kg.
Engineering and use context
In the AMT, a large, pleated, lightweight diaphragm is driven across its surface by rows of metallic strips in a strong magnetic field, and the pleats contract and expand to squeeze the air between them. Wharfedale describes it as a velocity rather than pressure transducer. A high-plasticity coating controls the acoustic behaviour of the woven glass fibre matrix midrange cone, which has a low-damping foamed rubber-like surround. Its 25 mm two-layer voice coil sits in a gap with an aluminium ring that controls eddy currents and linearises inductance. A die-cast aluminium basket with large ventilation windows below the spider and a central phase plug complete the midrange unit.
Each bass unit has a highly flexible rubber surround, a die-cast aluminium chassis and an aluminium ring for eddy current control, with a 17.5 mm long, 38 mm diameter voice coil and 12 mm of linear excursion. They are loaded by SLPP (Slot-Loaded Profiled Port), which vents to a profiled slot at the base of the speaker. Cabinet walls use PROS (Panel Resonance Optimization System), a sandwich of different woods under lacquer hand polished to six levels. Crossover slopes are matched to Linkwitz-Riley characteristics. Silicon-iron cored coils with low DCR are used for bass and midrange, air core coils in the treble and low ESR polypropylene capacitors throughout the signal path.
Pairing
An amplifier stable into 3.2 ohms is required. The matching centre speaker is the Elysian C.
Alternatives
The Elysian 3 is the smaller floorstanding speaker in the Elysian series.