Hifiverse

Floorstanding loudspeakers — Wharfedale DIAMOND 12.3i

Description, images, technical data and specifications

Wharfedale DIAMOND 12.3i
Image source - (c) Wharfedale

The Diamond 12.3i is the smaller of the two floorstanding speakers in Wharfedale's Diamond 12i series. Wharfedale launched the 12i range in November 2025 as an update of the Diamond 12 series introduced in 2020, with new finishes and acoustic changes to the port and internal damping. UK price stayed at GBP 499 per pair. The four wood-effect finishes of the original Diamond 12.3 gave way to All-Black semi-matte, Classic Walnut with a semi-matte black baffle, and Stone Grey.

Key specs that matter

This is a 2.5-way bass reflex floorstanding speaker. It has two 130 mm Klarity (advanced PP) cones, one as a bass unit and one as a mid/bass unit, plus a 25 mm textile dome tweeter, with a crossover frequency of 2.2 kHz. Frequency response is 45 Hz - 20 kHz (±3 dB), and bass extension is 40 Hz (-6 dB). Sensitivity is 89 dB (2.83 V/1 m), and peak SPL is 102 dB. Nominal impedance is 8 ohms compatible (min. 5.0 ohms). Recommended amplifier power is 30 - 150 W. Cabinet volume is 26.6 litres. Dimensions are (925 + 50) x 180 x (320 + 28) mm (H x W x D), and net weight is 19.5 kg.

Engineering and use context

Port work for the 12i was led by Peter Comeau, Wharfedale's Director of Acoustic Design, with senior engineers Dan Bailey Ornellas and Oliver Davies. Laser interferometry, anechoic and in-room measurements and computational fluid dynamics (CFD) of airflow and pressure in the port were used, and the internal damping was revised as well.

Its mid/bass cones are unchanged from the Diamond 12. Klarity is a blend of polypropylene and mica, used with a low-damping surround and a ribbed cone profile developed by simulation. Each magnet system carries an aluminium compensation ring to reduce the effects of inductance change as the voice coil moves, and the coil is wound on a high-power epoxy/glass fibre bobbin.

A woven polyester dome with a high-loss damping coating is used for the tweeter. Its front plate has a flat profile and a minimal waveguide. According to Wharfedale, the Linkwitz-Riley crossover uses air-core inductors, and the magnet structure of the mid/bass driver is modified to address their resistance. Cabinet walls are a multi-layered sandwich, with the adhesive between layers acoustically tested. Intelligent spot bracing connects opposite walls with computer-modelled braces. Spikes with locknuts thread into inserts in the plinth.

Pairing

A stereo integrated or power amplifier within Wharfedale's recommended power range is the match. The matching centre speaker is the Diamond 12.Ci, and the Diamond 12 3Di is the effects speaker of the same series.

Alternatives

The Diamond 12.4i is the larger floorstanding speaker of the Diamond 12i series.

Specifications

Related content

More components