Hifiverse

Floorstanding loudspeakers — Dynaudio Confidence 50

Description, images, technical data and specifications

Dynaudio Confidence 50
Image source - (c) Dynaudio

The Confidence 50 is a three-way floorstanding loudspeaker in the Confidence series from Dynaudio of Denmark. In height it matches the Confidence C4, the earlier top model of the range, and like the C4 it has twin woofers and twin midrange drivers. Earlier Confidence floorstanding models used two tweeters, while the Confidence 50 has one. Dynaudio developed it at Dynaudio Labs and tested it in the Jupiter measuring facility there.

Key specs that matter

Driver complement is a 28 mm Esotar3 soft-dome tweeter, two 15 cm MSP midrange drivers with the Horizon surround and two 18 cm MSP woofers. Crossover frequencies are 200 Hz and 2860 Hz, with 2nd/3rd order slopes and DDC. Box principle is bass reflex with a down-firing port. Sensitivity is 87 dB (2.83 V/1 m). Rated impedance is 4 ohms, with a minimum of 2.7 ohms at 79 Hz. Frequency response is 35 Hz - 22 kHz (±3 dB). IEC long-term power handling is 400 W. Cabinet dimensions are 218 x 1512 x 399 mm (W x H x D), or 364 x 1557 x 424 mm including feet and grille, and weight is 49.6 kg.

Engineering and use context

Dynaudio Directivity Control (DDC) centres on the DDC Lens, a precision-machined waveguide around the Esotar3. According to Dynaudio, the lens is simulated and topology-optimised to focus tweeter, midrange drivers and woofers vertically on the listening position, with reduced reflections from floor and ceiling. Optimised crossovers, waveguides and baffles give a simpler DDC platform with a single tweeter.

Inside the Esotar3 there is a neodymium magnet system, revised airflow routing and the Hexis inner dome against resonances. Each midrange cone ends in the Horizon surround, which follows the cone shape right to the edge of the driver and lowers the first resonant mode of the surround. Both midrange units sit flush with the baffle to reduce diffraction, and their basket has a lightweight topology-optimised design for more airflow at lower weight.

All drivers are mounted in a Compex composite baffle, which is part of the DDC Lens system and provides coupling and decoupling of the drivers. The NeoTec woofers combine neodymium magnets with aluminium and copper voice coils. Under the cabinet is the reflex port, so there is no port opening in the finish.

Pairing

An amplifier stable into low impedances is required.

Alternatives

Dynaudio's Confidence 60 is a bigger Confidence floorstanding speaker that uses two 23 cm MSP woofers.

Specifications

  • Model name

    Confidence 50

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    22000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    400

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    21.8 × 151.2 × 39.9

  • Weight (kg)

    49.6

  • Official link

More components