Hifiverse

Floorstanding loudspeakers - Voxativ ALBERICH2

Description, images, technical data and specifications

Voxativ ALBERICH2
Image source - (c) Voxativ

The ALBERICH² System is a two-module floorstanding loudspeaker from Voxativ of Zossen, Germany, made of a HAGEN² Monitor wideband speaker on top of an active AST Ripol bass module. Its name comes from Wagner's Ring Cycle, where Alberich is the king of the dwarves and the father of Hagen. Voxativ applied the modular formula of the 9.88 to a smaller and more affordable model. The HAGEN² Monitor appeared in August 2024 and the complete ALBERICH² followed in spring 2025. EU pricing is EUR 19,900 per pair with the AF-1.9 driver, EUR 23,900 with the AF-2A and EUR 29,900 with the AF-2B, plus EUR 1,000 for gloss white and EUR 4,000 for luxury finishes.

Key specs that matter

Frequency response is 20 Hz - 33 kHz. Efficiency is 93 to 98 dB (1 W/1 m), depending on the driver. Capacity is 500 W sinus. Each speaker measures 205 x 1050 x 250 mm (W x H x D) and weighs 48 to 84 kg depending on version. Standard colour is Berlin Black.

Engineering and use context

Voxativ describes the ALBERICH² not as a hybrid system but as a fully unified two-way design. In the upper module the HAGEN² enclosure is a short back-loaded horn with an optimised horn contour, and Voxativ Acoustic Stealth Technology (AST) suppresses resonances and standing waves. Three wideband drivers are offered for it - the AF-1.9, the AF-2A with an AlNiCo magnet and the AF-2B. No crossover or passive components sit in the signal path of the monitor.

Beneath it the AST Ripol bass module works purely in the analogue domain, without digital correction or latency. According to Voxativ it is matched to the monitor both acoustically and mechanically. An ALBERICH² Metal version, added in August 2025 from EUR 36,900 per pair, uses enclosures of precision-cut aluminium plates welded together, the AC-ZA bass module and a 127 mm AF-2A black-cone driver. Speakers are assembled in about two weeks after payment.

Pairing

An amplifier able to handle the complex load of Voxativ wideband drivers is required. A preamp output is required for the woofer section. For the Metal version Voxativ names its own T-211 integrated amplifier as the match.

Alternatives

The Voxativ 9.88 SYSTEM is the larger three-module design, adding a .01 Mid-Module and a twin-woofer Pi-Bass below its back-loaded horn top.

Specifications

  • Model name

    ALBERICH2

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    33 000

  • Sensitivity (dB at 1 W/1m)

    93-98

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    20.5 x 105 x 25

  • Weight (kg)

    84

  • Official link

More components