Hifiverse

Floorstanding loudspeakers - Linn 360 Exakt Integrated

Description, images, technical data and specifications

Linn 360 Exakt Integrated
Image source - (c) Linn

The 360 Exakt Integrated is the fully integrated version of Linn's 360, a four-way floorstanding loudspeaker introduced in April 2023. Linn describes it as a fully integrated Aktiv loudspeaker with built-in Exakt technology, and each speaker contains its own amplification with Adaptive Bias Control, an Exakt digital crossover and Organik DACs. At launch the pair was listed at GBP 87,500.

Key specs that matter

The driver complement is a 19 mm thin-ply woven carbon dome tweeter, a 64 mm thin-ply woven carbon dome midrange, a 190 mm aluminium/magnesium cone upper bass unit and two 220 mm long-throw aluminium cone lower bass units. Speakers built before September 2024 (serial no. 1615037) have a beryllium dome tweeter. Frequency response is 20 Hz - 32 kHz (±2 dB). Each Power DAC is rated at 500 W into 4 ohms, the bridged upper bass amplifier at 300 W into 4 ohms, and the midrange and tweeter amplifiers at 150 W each into 4 ohms. Cabinet volume is 60 litres. With stand, one speaker measures 411 x 1141 x 484 mm (W x H x D) and weighs 66.4 kg.

Engineering and use context

Tweeter, midrange and upper bass form the 360 Array, driven by Linn-designed class AB amplifiers with Adaptive Bias Control - the upper bass channel is a bridged design, while the midrange and tweeter channels are single-ended. According to Linn, the tweeter amplifier is tuned for very low distortion up to the highest audio frequencies and improves the signal-to-noise level by around 15 dB over the prior art. Adaptive Bias Control measures, samples and digitises the output transistor current, and a digital control loop sets the bias through a DAC and an analogue floating bias circuit to negate crossover distortion at any temperature.

Both lower bass units are driven by the Linn Power DAC, a digital amplifier that combines DAC and amplifier in a single process and reduces distortion by over 10 dB at high playback levels compared with conventional designs. There is no servo. Each bass drive unit is measured, and individual compensation filters are applied in a feed-forward fashion. These woofers use the Pistonik motor system and have the same surface area as the Klimax 350 bass units with more than twice the excursion. Formed 3D laminates make up the cabinet, whose front baffle wraps around either side and tapers from bottom to top, with radii matched to each flush-mounted drive unit.

Pairing

An Exakt-capable Linn DS or DSM source is required. The matching source is the Klimax DSM. One Exakt IN and one Exakt OUT socket on the rear panel allow further Exakt products in the chain.

Alternatives

The Linn 360 Passive with Active Bass shares the cabinet and drive units but uses a three-way analogue passive crossover and separate amplification for the upper three sections.

Specifications

  • Model name

    360 Exakt Integrated

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    41.1 × 114.1 × 48.4

  • Weight (kg)

    70

  • Official link

More components