Hifiverse

Floorstanding loudspeakers - Linn Linn 360 Passive with Active Bass

Description, images, technical data and specifications

Linn Linn 360 Passive with Active Bass
Image source - (c) Linn

The 360 Passive with Active Bass, abbreviated by Linn to PWAB, is a four-way floorstanding loudspeaker introduced in April 2023. Linn offers the 360 in two versions, the fully integrated 360 Exakt Integrated and this PWAB model, which partners a pair of Klimax Solo amplifiers in a separates system. It can be converted to work in an Exakt system alongside a Klimax Exaktbox and six channels of Klimax Solo amplification.

Key specs that matter

The driver complement is a 19 mm thin-ply woven carbon dome tweeter, a 64 mm thin-ply woven carbon dome midrange, a 190 mm aluminium/magnesium cone upper bass unit and two 220 mm long-throw aluminium cone lower bass units. Speakers built before September 2024 (serial no. 1615037) use a beryllium dome tweeter. Efficiency is 87 dB for 1 W at 1 m, and frequency response is 20 Hz - 28 kHz (±2 dB). The bass system has Power DAC amplifiers rated at 2 x 500 W. Cabinet volume is 60 litres. With stand the speaker measures 411 x 1141 x 484 mm (W x H x D) and weighs 66.4 kg.

Engineering and use context

Tweeter, midrange and upper bass run through a three-way analogue passive crossover, which Linn describes as an ultra-low-resonance design, and connect through three pairs of 4 mm binding posts. Linn's Power DAC combines DAC and amplifier into a single process. The analogue signal for the lower bass is digitised and taken either from the upper bass terminals (INT) or from a balanced line-level XLR input, chosen by a FEED switch, with a GAIN control to match the external power amplifier. According to Linn, the compact bass system needs electronic compensation for extended bass, which cannot be done passively. Each bass drive unit is measured, and individual compensation filters are applied in a feed-forward fashion rather than by a servo system.

The lower bass units use the Pistonik motor system, a very long-stroke motor topology with an extended magnet gap and a motor assembly held in permanent magnetic saturation. A triple-layered ventilation network cools the voice coil. Linn quotes more than twice the excursion of the Klimax 350 bass units with the same surface area. The cabinet is built up from formed 3D laminates, and its front baffle wraps around both sides and tapers from bottom to top, with the drivers mounted flush. A covered Exakt link socket is used only for external Exakt operation, and the active bass system contains its own ExaktEngine.

Pairing

A stereo power amplifier or integrated amplifier is required for the upper bass, midrange and tweeter. The matching power amplifiers are a pair of Linn Klimax Solo. A source with a balanced XLR line output can send the bass signal to the Power DAC directly.

Alternatives

The Linn 150 is a passive floorstanding loudspeaker from the current Linn range.

Specifications

  • Model name

    360 Passive with Active Bass

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    41.1 x 114.1 x 48.4

  • Weight (kg)

    66.4

  • Official link

Related content

More components