Hifiverse

Bookshelf Speakers - Raidho Acoustics X1.6 Reference

Description, images, technical data and specifications

Raidho Acoustics X1.6 Reference
Image source - (c) Raidho Acoustics

The X1.6 Reference is a two-way stand-mount monitor from Raidho Acoustics, the Danish loudspeaker maker run under Dantax Radio A/S in Pandrup. It is a revised version of the X1.6, and the original X1.6 stays in the range. Raidho announced the new model in May 2026 and presented it at the Austria Center Vienna during HIGH END Vienna 2026, which ran 4 - 7 June. Its recommended retail price is EUR 10,000 per pair.

Key specs that matter

Bass loading is a passive radiator on the back of the cabinet. Drive units are one Raidho Ribbon tweeter, one 165 mm Raidho Ceramix bass/midrange driver and one 152 x 229 mm passive radiator, with the crossover point at 3.5 kHz. Frequency range is 40 Hz - 50 kHz (±3 dB). Sensitivity is 87 dB (2.83 V/1 m) and nominal impedance is above 6 ohms. Each cabinet measures 200 x 360 x 300 mm (W x H x D) and weighs 11.5 kg. Connection is single-wire. Finishes are black or white high gloss, with custom colours on request.

Engineering and use context

Raidho's tweeter is a planar-magnetic ribbon with an 11 micron foil weighing 20 mg. According to Raidho, this foil carries around 50 times less mass than the diaphragm of a conventional dome tweeter, and its first breakup mode lies at 82 kHz. Ceramix is the company's cone technology - a lightweight aluminium cone whose outer surfaces are converted into aluminium-oxide ceramic, giving a naturally bonded sandwich of aluminium core and ceramic skins. In the bass/midrange driver, neodymium magnets drive a titanium voice coil inside an open motor structure, and the airflow cools the coil. Both drivers are built in-house at the factory in Denmark.

Compared with the X1.6, this version has a completely hand-built crossover with Mundorf components. Cabling based on Nordost Valhalla technology is used both inside the loudspeaker and within the crossover itself. The rear-mounted passive radiator is newly developed for this model. Every X1.6 Reference is assembled by hand in Denmark.

Pairing

An amplifier of at least 50 W is required, and Raidho recommends 100 W or more into 8 ohms. The matching stand is the Raidho / Scansonic stand in black or white at EUR 500 per pair, compatible with all Raidho and Scansonic compact loudspeakers.

Alternatives

The Raidho X1.6 is the standard version of this stand-mount, a two-way rear-ported design with a 20 mm cast aluminium front baffle and no passive radiator.

Specifications

  • Model name

    X1.6 Reference

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content

More components