The Crystal 4.2 is the larger of the two bookshelf speakers in the Wharfedale Crystal 4 series, above the compact 4.1. Completing the range are the 4.3 floorstanding speaker and the 4.C centre channel, a line-up Wharfedale engineered for movies and music. Wharfedale has been designing loudspeakers in Britain since 1932.
Key specs that matter
It is a two-way bass reflex design with a 125 mm woven Kevlar cone bass driver and a 25 mm soft dome tweeter. Crossover frequency is 2.6 kHz. Frequency response is 60 Hz - 20 kHz (±3 dB), and bass extension reaches 55 Hz (-6 dB). Sensitivity is 88 dB (2.83 V/1 m), with a peak SPL of 96 dB. Nominal impedance is 8 ohms compatible and minimum impedance 4.4 ohms. Wharfedale recommends 20 - 100 W of amplifier power. Each 6.9-litre cabinet is 265 mm high on its plinth, 180 mm wide and 212 mm deep, plus 10 mm for grille and terminal. Net weight is 4.2 kg per speaker, and a carton of two measures 475 x 300 x 385 mm at 9.6 kg.
Engineering and use context
Wharfedale uses Kevlar for the low-frequency drivers of its leading products and describes it as light, stiff and strong. In the Crystal 4 series the bass and mid drivers use a woven Kevlar weave, combined with Wharfedale motor systems and in-house manufacturing. Every model in the series has the same soft dome tweeter, specified by Wharfedale for wide dispersion.
On the 4.3 floorstanding speaker an additional bass driver of Hot Compacted Woven Polypropylene is used, with aligned polypropylene fibres in a matrix of thermoformed polypropylene. According to Wharfedale, the 4.C centre channel reproduces approximately 80% of the dialogue in a home cinema system. The 4.2 itself is not magnetically shielded for AV use. Black, white and walnut vinyl wrap finishes are offered, with a three-year warranty.
Pairing
An amplifier or AV receiver stable into 4 ohms is required. The matching centre channel is the Crystal 4.C.
Alternatives
The Crystal 4.1 is the smaller Wharfedale bookshelf speaker in the same series.