The Mini T10 is the largest of the three point-source stand-mounts in Bryston's T10 loudspeaker range, a three-way design from the Ontario electronics and loudspeaker maker. Its name celebrates ten years of the Model T series, first developed by CEO James Tanner with Axiom Audio. US price is USD 5,990 per pair.
Key specs that matter
The driver complement is a single 25 mm titanium tweeter, a single 133 mm midrange and a single 203 mm woofer, crossed over at 250 Hz and 2 kHz. Its reflex-loaded enclosure gives a frequency response of 35 Hz - 20 kHz (±3 dB). Impedance is 4 ohms. Bryston rates sensitivity at 90 dB in room and 86 dB anechoic (1 W/1 m). Amplifier power from 20 W minimum up to 600 W RMS maximum is specified. Dimensions are 571 x 267 x 250 mm (H x W x D), and each speaker weighs 19 kg.
Engineering and use context
Bryston developed the fluted profile of its Reflex/Vortex port to eliminate vent noise at high pressures. Walls are thick, the front baffle reaches 38 mm, and the cabinet has a network of internal braces. Drive units were designed with modelling and finite element analysis and then verified for performance and durability in Bryston's anechoic chamber and accelerated life test facility. Off axis, the response is specified as flat within ±15 degrees.
Four changeable modules come with each speaker - single-amp, bi-amp, tri-amp and active. With the active module in place of the passive crossover module, no internal crossover remains in the cabinet. Each driver section is then powered directly by its own amplifier channel. Active operation uses the BAX-1 DSP crossover, which runs software dedicated to the Mini T10, derived from over 300 vertical and horizontal measurements in Bryston's anechoic chamber. Walnut, Boston Cherry and Black Ash are the stock finishes, and further natural wood and painted veneers can be ordered. Each speaker is constructed in Canada and carries a 20-year warranty to the original owner.
Pairing
An amplifier stable into 4 ohms with at least 20 W per channel is required. Tri-amping requires three amplifier channels per speaker. Active use requires the BAX-1 crossover and three channels of equal gain per speaker.
Alternatives
The Bryston Compact T10 is the smaller T10 point-source stand-mount, with a 165 mm woofer, 8 ohm impedance and a 45 Hz lower limit.