The Compact T10 is a three-way stand-mount loudspeaker from Bryston's T10 range, listed by the Canadian company as a point-source model. Its T10 name marks the tenth anniversary of the original Model T line, which Bryston CEO James Tanner initiated and which was developed with Andrew Welker and Ian Colquhoun of Axiom Audio. Among the point-source models, it sits between the Tiny T10 and the Mini T10.
Key specs that matter
Drive units are a single 25 mm titanium tweeter, a single 133 mm midrange and a single HP 165 mm woofer, with crossover points at 250 Hz and 2 kHz. The enclosure is reflex-loaded. Frequency response is 45 Hz - 20 kHz (±3 dB), and impedance is 8 ohms. Bryston quotes sensitivity as 91 dB in room and 87 dB anechoic (1 W/1 m). Minimum amplifier power is 10 W, and maximum amplifier power is 500 W RMS. Each speaker measures 483 x 236 x 267 mm (H x W x D) and weighs 12 kg.
Engineering and use context
Its cabinet has thick walls, a front baffle up to 38 mm thick and a network of internal braces. Bryston calls the port design Reflex/Vortex - a fluted port profile intended to eliminate vent noise at high pressures. Besides dividing the spectrum, the passive crossover network corrects small non-linearities of the drive units. Bryston developed its drivers with modelling and finite element analysis tools and verified performance and durability in its anechoic chamber and accelerated life test facility. The company specifies a flat response within ±15 degrees off axis.
Every T10 speaker comes with four changeable modules - single-amp, bi-amp, tri-amp and active. Changing the passive crossover module for the active one converts the speaker to active operation. In that version no internal crossover is present, and each driver section is powered directly by its own amplifier channel, three per speaker. The crossover is then the external BAX-1 DSP unit with 96/24 conversion, an XLR analogue input and three pairs of XLR outputs. Its software is model-specific, set from over 300 anechoic measurements taken vertically and horizontally around the speaker. Stock finishes are Walnut, Boston Cherry and Black Ash, with other natural wood and painted veneers to order. Each speaker is constructed in Canada and carries a 20-year warranty to the original owner.
Pairing
An amplifier of at least 10 W per channel is required. Active operation requires the BAX-1 crossover and three amplifier channels of equal gain per speaker. Bryston offers the Target MR stand as an option.
Alternatives
The Bryston Mini T10 is the larger T10 point-source stand-mount, with a 203 mm woofer, 4 ohm impedance and bass extension to 35 Hz.