The LX-1 MKII is a two-way standmount loudspeaker from Mission, the smallest of the three standmount models in the LX MKII Series. That series has nine models in all - three standmount, three floorstanding, the LX-C1 MKII and LX-C2 MKII centre speakers and the LX-3D Surround MKII. Mission lists it as a standmount and surround speaker and places the LX MKII line below its mid-level QX and flagship ZX ranges. Finishes are Walnut Pearl and the matte Lux White and Lux Black.
Key specs that matter
This is a bass reflex design with a 100 mm composite fibre bass driver and a 25 mm microfibre dome treble driver, crossed over at 2.7 kHz. Sensitivity is 86 dB (2.83 V/1 m) and peak SPL is 99 dB. Impedance is 8 ohms compatible, with a minimum of 4.2 ohms. Frequency response is 58 Hz - 20 kHz (±3 dB), and bass extension reaches 55 Hz (-6 dB). Recommended amplifier power is 20 - 80 W. Cabinet volume is 5.5 litres. Each speaker is 260 mm high on its plinth, 160 mm wide and 200 + 8 mm deep with terminals, with a net weight of 4.13 kg. It is not magnetically shielded.
Engineering and use context
Mission's Inverted Driver Geometry (IDG) is retained, so the high-frequency unit sits below the bass/midrange driver. According to Mission, this equalises the path length so the sound waves coincide at the listener's head height and improves time alignment and transient performance.
Lead acoustic designer Peter Comeau developed the MKII over hundreds of hours of listening, using trickle-down innovations from the ZX series. Its DiaDrive bass unit was revised for better control of the low-frequency diaphragm. Serrations in the driver surrounds, first used in the ZX and QX models, scatter interfering reflections from localised surfaces to the dome and cone. With these driver response perturbations removed, the crossover of each LX MKII model was optimised again, and a re-engineered cabinet bracing system is used.
All drive units are manufactured in Mission's own factory with precision tooling. Its binding posts are single-wired. The bass port is on the rear, and foam port bungs are supplied to alter the bass parameters and damp resonances.
Pairing
An amplifier stable into 4 ohms is required. In a system with a subwoofer the AV processor speaker size is set to Small. The matching centre speakers are the LX-C1 MKII and LX-C2 MKII.
Alternatives
The LX-2 MKII is the next standmount in the series, with a 130 mm composite fibre bass driver and an 8.5 litre cabinet.