Hifiverse

Bookshelf Speakers — Wharfedale Evo4.2

Description, images, technical data and specifications

Wharfedale Evo4.2
Image source - (c) Wharfedale

The Wharfedale EVO4.2 is a three-way bookshelf speaker with a bass reflex enclosure. The EVO4 range was announced for summer 2019 and comprises the EVO4.4 and EVO4.3 floorstanding speakers, the three-way EVO4.2 and two-way EVO4.1 standmounts, the EVO4.C centre and the bipolar EVO4.S surround. According to the British maker, EVO4 grew out of the research and development behind its ELYSIAN range and borrows much of the technology used there. Black Oak, Walnut and White Oak are the three available finishes in book-matched real wood veneer, and Wharfedale covers the speaker for three years.

Key specs that matter

A 165 mm unit using a black woven Kevlar diaphragm covers the bass, a 50 mm soft dome handles the midrange, and treble goes to a 30 x 60 mm AMT. Crossover points are set at 1.4 kHz and 3.9 kHz. Wharfedale quotes 54 Hz to 22 kHz within 3 dB, with bass extension to 48 Hz at the 6 dB point. Sensitivity is 87 dB measured with 2.83 V at 1 m, nominal impedance is 8 ohm with a minimum of 4 ohm, and peak SPL reaches 105 dB. Each speaker stands 455 mm high, 250 mm wide and 350 mm deep and weighs 13.4 kg.

Engineering and use context

Most development effort in EVO4 went into the AMT, which Wharfedale describes as a radically different way of reproducing high frequency detail efficiently and accurately. With a small dome dedicated to the midrange band, the Kevlar cone does not have to reach into the upper mids, while the AMT only takes over above it. The cabinet uses construction similar to ELYSIAN, giving the drivers a stable and solid base, and its edges are radiused to reduce diffraction. The walls are a multi-layer sandwich with soft chipboard between MDF layers, stiffened by an Intelligent Spot Bracing system of computer-modelled wooden braces. All models in the range share the same Kevlar woofers and curved cabinet design. Two sets of angled 5-way binding posts allow bi-wiring. Low frequencies are vented through the SLPP bass reflex arrangement first developed for ELYSIAN and now carried over into this series.

Pairing

Wharfedale recommends amplifiers delivering 25 to 120 W per channel. Because impedance falls to a low minimum, an amplifier comfortable with low loads is a safer choice than a low-powered tube design, and the moderate sensitivity calls for reasonable output headroom. With the EVO4.C centre and EVO4.S surrounds from the same range, the EVO4.2 can take the main front positions in a multichannel setup. Optional stands are offered for this model.

Alternatives

The Wharfedale EVO4.1 offers a two-way bookshelf layout within the same EVO4 family.

Specifications

  • Model name

    Evo4.2

  • Frequency Response low +/- 3dB (Hz)

    54

  • Frequency Response high +/- 3dB (Hz)

    22 000

  • Sensitivity (dB at 1 W/1m)

    105

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    25 - 120

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    45.5 x 25.0 x (34.0+1.0)

  • Weight (kg)

    13.4

  • Official link

More components