Hifiverse

Bookshelf Speakers — Wharfedale Diamond 12.0

Description, images, technical data and specifications

Wharfedale Diamond 12.0
Image source - (c) Wharfedale

The Diamond 12.0 is the smallest two-way bookshelf speaker in Wharfedale's Diamond 12 series, introduced in 2020 and replaced by the DIAMOND 12i generation in December 2025. Wharfedale presented it as an ultra-compact design for small hi-fi systems and as a satellite for home theatre. The range also comprised the 12.1 and 12.2 bookshelf models, the 12.3 and 12.4 floorstanding speakers, the 12.C centre and the 12 3D. Its successor, the 12.0i, kept the UK price of GBP 199 per pair. Finishes were Black Oak, Light Oak, Walnut Pearl and White Oak.

Key specs that matter

This 2-way bass reflex model has a 100 mm advanced PP cone bass driver and a 25 mm textile dome tweeter. Crossover frequency is 2.7 kHz. Frequency response is 70 Hz - 20 kHz (±3 dB), with bass extension to 65 Hz (-6 dB). Sensitivity is 87 dB (2.83 V/1 m), and peak SPL is 95 dB. Nominal impedance is 8 ohms (min. 4.0 ohms). Recommended amplifier power is 20 - 60 W. Cabinet volume is 4.4 litres, dimensions are 265 x 160 x 228 mm (H x W x D, 200 mm plus 28 mm for the terminals), and net weight is 5.1 kg.

Engineering and use context

Klarity, the cone material, is a blend of polypropylene and mica that adds stiffness to reduce flexing. Wharfedale simulated many cone shapes and added ribs for further stiffening, so the cone uses a low-damping surround instead of a high-damping one. Its precision magnet system has an aluminium compensation ring to minimise the effect of inductance variations as the voice coil travels. The coil is wound on a high-power epoxy/glass fibre bobbin, which adds no eddy currents, gives greater power handling than an aluminium bobbin and is stiffer than a Kapton type.

A woven polyester film with a high-loss coating forms the 25 mm dome. Its front plate is flat and exposes as much of the dome as possible, and a very short duct in it balances the acoustic load. The crossover network uses an acoustic LKR 24 dB topology with air-core inductors, chosen by Wharfedale for the lowest distortion of all inductor types. To compensate for the higher resistance of these inductors, the magnetic structure of the mid/bass driver is modified.

Each rear-ported enclosure has a multi-layered sandwich construction, and the resonant properties of the glue between layers were measured. Intelligent Spot Bracing connects opposite walls with computer-modelled wood braces instead of a figure-of-eight brace.

Pairing

An amplifier stable into 4 ohms is required. The matching centre speaker is the DIAMOND 12.C.

Alternatives

The Wharfedale Diamond 12.1 is the next bookshelf model in the series, with a 130 mm bass driver and an 8.2-litre cabinet.

Specifications

  • Model name

    Diamond 12.0

  • Frequency Response low +/- 3dB (Hz)

    70

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    20 - 60

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    26.5 x 16.0 x (20.0+2.8)

  • Weight (kg)

    5.1

  • Official link

More components