Hifiverse

Headphones - FiiO FT7

Description, images, technical data and specifications

FiiO FT7
Image source - (c) FiiO

FiiO, a Chinese audio company founded in 2007, places the open-back FT7 in its flagship class of planar magnetic headphones. It uses a 106 mm planar driver developed in-house by FiiO. The diaphragm alone took two years of independent research and development, and the driver then went through more than one year of aging tests. At launch it was priced at USD 699.

Key specs that matter

Driver type is planar magnetic, 106 mm. Frequency response is 5 Hz - 40 kHz. Impedance is 25 ohms ±15%. Sensitivity is 94 dB/mW and 110 dB/Vrms (both at 1 kHz). Weight is approximately 427 g without cable, and earpad pressure is 4.2 N ±0.3 N. Cable length is approximately 3 m, with a 4.4 mm balanced plug. Hi-Res Audio certification comes from the Japan Audio Society (JAS) and the Consumer Electronics Association (CEA).

Engineering and use context

Each diaphragm is 1 µm thick and uses PET as the substrate. Its coating combines 24K gold and pure silver.

Behind the diaphragm is a dual-sided push-pull magnetic circuit. Each driver has 18 N52 neodymium magnets, 9 on either side, with magnetic flux of up to 1.5 T. FiiO uses rounded-corner magnets to obtain a uniform magnetic field, aiming at even stress across the diaphragm and lower breakup and distortion.

Much of the FT7 is made of lightweight, high-strength carbon fibre, including a large carbon fibre body. The grilles are natural Zebrawood from West Africa, from trees that typically grow at an altitude of 1,600 m. According to FiiO, the cable conductor is over 6N OCC (99.99998%) monocrystalline copper, cryogenically treated at -192°C for seven days.

Supplied with the headphone are the balanced cable with its 4.4 mm plug, adapters from 4.4 mm to XLR-4 and to 6.35 mm, two sets of earpads (lambskin and breathable fabric) and a linen storage bag.

Pairing

A 4.4 mm balanced headphone output is required, or a 4-pin XLR or 6.35 mm output through the supplied adapters.

Alternatives

FiiO also makes the FT13, a closed-back headphone with a 60 mm dynamic driver.

Specifications

  • Model name

    FT7

  • Transducer principle

    Electostatic or Planar magnetic

  • Scheme

    Open

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    N/A

  • Frequency response high +/- 10dB (Hz)

    N/A

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    94

  • Impedance (Ohm (1 kHz))

    N/A

  • Playback time (hours)

    N/A

  • Weight (g)

    427

  • Official link

Related content

More components