Hifiverse

Headphones - FiiO FT13

Description, images, technical data and specifications

FiiO FT13
Image source - (c) FiiO

The FT13 is a closed-back dynamic headphone from FiiO and the follow-up to the company's FT1 wooden headphone. Its earcups are made of Purpleheart wood, which FiiO allows to age naturally for 90 days before use, and two colours are listed - natural wood and black. The price at launch was USD 299.

Key specs that matter

Headphone type is closed-back dynamic, with a 60 mm dynamic driver. Frequency response is 7 Hz - 40 kHz. Impedance is 32 ohms. Sensitivity is 98 dB/mW and 113 dB/Vrms (both at 1 kHz). Weight is about 356 g without cable, and earcup pressure is 4.2 N ±0.3 N. Cable length is about 1.5 m, with dual 3.5 mm (TS) connectors at the headphone end and 3.5 mm and 4.4 mm audio plugs.

Engineering and use context

FiiO uses a wool composite nano-fibre wood diaphragm, made with the same traditional paper-making process as the FT1 diaphragm and then baked and moulded to a thickness of 0.1 mm. A W-shaped profile increases the effective vibration area of the diaphragm by 25.8%, according to FiiO. The diaphragm combines a hard dome with a flexible surround. Its voice coil is 25 mm in diameter, wound with Japanese-imported CCAW wire 0.035 mm thick.

Inside each earcup, a U-shaped damping tube is optimised to lower the resonant frequency of the cavity. Passive isolation comes from a standing wave dissipation chamber and sound-absorbing cotton in the rear cavity, and FiiO quotes ambient noise reduction of up to 26 dB.

Its headband has an outer U-shaped frame of magnesium alloy, a lambskin contact surface and a three-axis adaptive swivel that FiiO developed after ergonomic testing. Two pairs of earpads are included, lambskin and suede, both with memory foam inside.

The cable is an 8-strand braid of Furukawa monocrystalline copper and silver-plated oxygen-free copper with 1,000 conductors in total. Its plug system comes with two interchangeable plugs, 3.5 mm single-ended and 4.4 mm balanced, plus two adapters - 3.5 mm to 6.35 mm, and 4.4 mm to XLR-4 balanced for professional desktop equipment. The box also holds a quick start guide, a storage pouch, a cleaning cloth and a linen storage bag.

Pairing

A 3.5 mm or 4.4 mm balanced headphone output is required, or a 6.35 mm or XLR-4 output through the supplied adapters.

Alternatives

The FiiO FT7 is the brand's open-back planar magnetic headphone.

Specifications

  • Model name

    FT13

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    7

  • Frequency response high +/- 10dB (Hz)

    40 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    3.5mm

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    113

  • Impedance (Ohm (1 kHz))

    32

  • Playback time (hours)

    N/A

  • Weight (g)

    356

  • Official link

Related content

More components