Hifiverse

Headphones - FiiO EH11

Description, images, technical data and specifications

FiiO EH11
Image source - (c) FiiO

The EH11 is a Bluetooth mini on-ear headphone from FiiO of Guangzhou, styled after the mini on-ear headphones of the 1980s. Its see-through housing shows the internals, and small wooden earcups sit on each side of a slim headband, a look FiiO calls retro-futurism. FiiO announced it in January 2026 at USD 50. The clear and clear-black colourways came first, and Off-white, Burgundy and Cyan versions were expected in February 2026.

Key specs that matter

Each earcup has a 40 mm long-throw dynamic driver with a high-damping composite diaphragm. Bluetooth is version 6.0 with the LDAC and SBC codecs. LDAC runs at up to 990 kbps, roughly three times the rate of standard SBC and AAC transmission, and holds Hi-Res Wireless certification. Battery life is up to 30 hours, or 16 hours with LDAC and 27 hours with SBC at 85 dB, and charging takes about 2 hours. Weight is about 92 g, with a clamping force of about 1.7 N.

Engineering and use context

FiiO states that the driver addresses the bass leakage of classic on-ear designs. Its resonant frequency is 60 Hz, and the bass extends to 17 Hz. The acoustic design is semi-open, with ventilation ports and damping filters, and compared with a fully open back the damping system controls air flow to limit leakage.

Inside are a JL7018 main controller chip and two ES9068AS DAC chips, one for each channel. LDAC is on by default and draws slightly more power than SBC, so it can be switched off in the FIIO Control app. The headband is injection-moulded PC and has passed reliability testing. On each earcup a maple wood knob doubles as the control, and rotating it skips tracks or changes volume.

Foam earpads come off for cleaning or replacement, and a second pair in a different colour is supplied besides the pre-installed pair. Charging current is about 190 mA, and FiiO recommends a 5 V, 1 - 2 A adapter because the EH11 has no fast charging. Supplied with the headphone are a USB-A to Type-C charging cable and a quick start guide. The FIIO Control app for Android and Apple devices has pop, classical, jazz and rock sound profiles and a gaming sound mode, and firmware updates are installed from it online or from a local file downloaded from the FiiO website.

Pairing

The full LDAC rate needs a source with LDAC output, and other sources connect over SBC. Two Bluetooth devices, for example a PC and a phone, can stay connected at once. Bluetooth calling is supported through a built-in microphone with environmental noise reduction.

Alternatives

FiiO has no other on-ear model, and the nearest wireless headphone in its range is the over-ear EH3 NC with active noise cancelling.

Specifications

  • Model name

    EH11

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Semi-open

  • Wearing style

    On-ear

  • Frequency response low +/- 10dB (Hz)

    N/A

  • Frequency response high +/- 10dB (Hz)

    N/A

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedance (Ohm (1 kHz))

    N/A

  • Playback time (hours)

    up to 30

  • Weight (g)

    N/A

  • Official link

More components