Hifiverse

Preamplifiers — Burmester 808 MK5

Description, images, technical data and specifications

Burmester 808 MK5
Image source - (c) Burmester

The 808 MK5 is a modular stereo line preamplifier from Burmester of Berlin, the current version of a design whose first generation appeared in 1980. It belongs to the brand's Reference Line and consists of a main unit with configurable module slots and a separate power supply in its own chassis.

Key specs that matter

The main chassis offers six input module slots and two output module slots, so the owner chooses which connections are fitted. Optional modules include line and tape boards as well as MM and MC phono stages. Frequency response runs from 2 Hz to 680 kHz, input sensitivity is 110 mV for 1 V output, and line input noise sits 107 dB below the signal. Distortion is quoted at 0.001 percent, maximum input level at 17 V and maximum output at 21.5 V. Input impedance is 10 kohm on both XLR and RCA inputs, while output impedance is 40 ohm balanced and 26 ohm single-ended. Power consumption is 60 W. The main unit measures 482 mm wide and 385 mm deep and weighs 23 kg, and the external supply is 482 x 95 x 285 mm and weighs 9 kg.

Engineering and use context

Every module uses discrete Class A X-Amp amplification stages with pure DC coupling. Volume is set in 60 logarithmic steps by a passive R-2R network of precision resistors switched by gold-plated reed relays, giving absolute symmetry between the channels at each step. Internal signal paths use shielded Burmester silver cable, and a metal base board helps isolate the circuitry from vibration. The line has been refined over several generations since 1980. Placing the ultra-low-noise power supply in a separate case keeps transformers away from the audio boards. Standard balanced and unbalanced inputs belong to the base configuration, and further boards are sold separately. The chrome top plate can carry up to 20 special potentiometers, and remote trigger outputs on four channels at 10 V DC with 5.5/2.5 mm cylindrical connectors switch connected components on and off. The preamplifier comes with a wireless remote control and is offered in black or silver.

Pairing

With balanced outputs of low impedance the 808 MK5 can drive long XLR runs to Burmester power amplifiers in stereo or mono configurations. Once an MM or MC board is installed, the 808 MK5 accepts a turntable without any outboard phono stage.

Alternatives

The Burmester 088 is the Top Line preamplifier, a dual-mono DC-coupled design that can be fitted with a DAC or phono module.

Specifications

  • Model name

    808 MK5

  • Analog inputs (balanced)

    4

  • Analog inputs (single-ended)

    8

  • Analog outputs (balanced)

    3

  • Analog outputs (single-ended)

    3

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    482 × 175 × 385

  • Weight (kg)

    22

  • Official link

More components