Hifiverse

Preamplifiers — Burmester 100

Description, images, technical data and specifications

Burmester 100
Image source - (c) Burmester

The 100 is a phono preamplifier from the Burmester Top Line, assembled by hand at the Berlin factory. Burmester links it to its 838 phono preamplifier of the 1980s and designed it both for record playback and for digital archiving of vinyl through an optional A/D converter. It went on sale in Japan in November 2010 at JPY 2,079,000, rising to JPY 2,250,000 in April 2013 and JPY 2,600,000 in March 2014, and the US list price was later USD 22,000.

Key specs that matter

Up to two balanced phono inputs (XLR 3-pin female) are available, ordered as 2 x MC, 2 x MM or MC plus MM. MC input resistance is 33, 75, 220 or 390 ohms, 1 kohm or 47 kohms. MM input capacitance is 68, 120, 180, 220, 300 or 400 pF, with input resistance fixed at 47 kohms. Gain has six steps per module - 37 to 52 dB for MM and 57 to 72 dB for MC, in 3 dB steps. Outputs are 1 XLR and 1 RCA. With the A/D converter the sampling rate is 48, 96 or 192 kHz at 24 bit. Standby consumption is <1 W. Dimensions are 482 x 96 x 344 mm (W x H x D), and weight is 9 kg.

Engineering and use context

The 100 recognises an MC or MM module automatically and shows it on the front panel. Impedance, gain, subsonic filter, output level and Auto Adjust are stored separately for each module. Relays switch the input impedances to keep signal paths as short as possible. Burmester recommends tonearm cables with XLR plugs, since a cartridge is a balanced source, and an RCA-to-XLR adapter is supplied for other leads.

Its AUTO ADJUST function corrects a channel imbalance of the cartridge of up to 6 dB to within 0.2 dB at the press of a button. A switchable subsonic filter is included. The signal path is DC-coupled without coupling capacitors, and the analogue output stages use X-Amp 2 modules with high drive capability for low-impedance inputs. Both outputs offer phase switching. Output level is fixed or variable, with volume set from the remote control only, and an extra +6 dB of output gain allows direct connection to power amplifiers or active loudspeakers.

On the optional A/D converter module the signal passes the X-Amp 2 stages before conversion, and the digital outputs are S/P-DIF coaxial and TOSLINK plus USB. An analogue VU meter and a fast overload LED show the recording level. The internal power supply is analogue. DC IN/OUT allows Master/Slave switching, and an optional BurLink module accepts control systems such as AMX and Crestron over RS232 and USB. Carbon spring feet reduce microphonic effects, and a system remote control is supplied.

Pairing

Two inputs allow two turntables or two cartridges. The XLR output connects to a balanced line input and the RCA output to an unbalanced one.

Alternatives

The Burmester 838 is the earlier phono preamplifier to which the 100 refers back.

Specifications

  • Model name

    100

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    1

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    482 × 96 × 344

  • Weight (kg)

    10

  • Official link

More components