Hifiverse

Preamplifiers — Burmester 088

Description, images, technical data and specifications

Burmester 088
Image source - (c) Burmester

The 088 is a stereo preamplifier in the Burmester Top Line. Burmester describes it as combining technical features of the Reference Line with the more compact construction of the Top Line, and several of its developments come from the Reference Line 077 preamplifier, among them the volume control. It succeeded the earlier 011. US list price was USD 28,995, or USD 37,000 with the DAC module, and the UK price was GBP 18,400.

Key specs that matter

Inputs are 6 XLR and 1 RCA, with optional MM or MC phono. Outputs are 1 XLR main output and 1 XLR tape output, plus a 6.3 mm headphone jack. Input impedance is 11 kohms (XLR) and 16.5 kohms (RCA), and output impedance is 230 ohms (XLR) and 116 ohms (RCA). Input sensitivity is 550 mV (XLR) and 90 mV (RCA) re 1 V. Maximum output level is 23.7 V. Frequency response is <10 Hz - 150 kHz (-3 dB), and signal-to-noise ratio is >107 dB. Dimensions are 482 x 96.7 x 344.5 mm (W x H x D), and weight is 9 kg.

Engineering and use context

Its circuit is a dual-mono design, and multilayer circuit boards reduce crosstalk between the inputs. The signal path is fully DC-coupled with no capacitors, and gain comes from Burmester X-Amp 2 modules. Input switching uses wear-free Burmester CMOS semiconductor switches.

Five of the inputs are balanced XLR and can run unbalanced through adapters. One input is a surround thruput terminal for integration with a home theatre system. A single module slot holds a Line module as standard, which adds an unbalanced high-level input. In its place Burmester offers a Phono MC3 or MM2 module or a D/A converter module with an S/P-DIF coaxial input and a USB slave input, based on 069 DAC technology with selectable upsampling to 96 kHz or 192 kHz.

Each input has its own sensitivity trim from -6 dB to +12 dB and a phase reversal switch for devices with a different XLR pin configuration. Gain at MAIN OUT is switchable between LOW and HIGH, and the TAPE output runs at fixed level. Volume is shown in 60 steps or in dB, and balance, switch-on volume and input names are programmable. Display brightness has four steps and an off setting, and the front controls can be locked. Master/Slave power switching of other Burmester units runs over DC IN/OUT, and BurLink is supported. The feet carry carbon fibre clips for resonance decoupling.

Pairing

The MAIN OUT gain setting covers power amplifiers and active loudspeakers. A home theatre processor connects through the surround thruput input.

Alternatives

The Burmester 077 is the Reference Line preamplifier from which the 088 takes its volume control.

Specifications

  • Model name

    088

  • Analog inputs (balanced)

    5 XLR + module slot

  • Analog inputs (single-ended)

    N/A

  • Analog outputs (balanced)

    2

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    482 × 96 × 346

  • Weight (kg)

    9

  • Official link

More components