The Calysto is the lowest-powered model of the DX9 amplifier range from Analog Domain Audio GmbH, the company Angel Despotov founded in Munich in 2010, now based in Taufkirchen, Germany. Analog Domain recommends it as the Mid/HF channel amplifier of a split system. Its front panel design and footprint are compatible with the Apollo, Athene and Artemis, so the amplifiers can be stacked.
Key specs that matter
Peak power output is 550 W into 8 ohms and 1.1 kW into 4 ohms, and the Calysto is 2 ohm stable with a minimum rated load of 4 ohms. Peak output voltage is 67 Vac (±95 Vpp), with a peak output current of 70 A. Voltage gain is +32 dB or +26 dB, switch-selectable. Input sensitivity is 1.55 Vrms and input impedance is 10 kohm. Frequency range is 1 Hz - 100 kHz, and full-power bandwidth is 5 Hz - 25 kHz. Output noise is below 35 µVrms, THD+N is below -92 dB (0.0025%), and dynamic range is over 126 dB linear and 132 dB A-weighted. Damping factor exceeds 1000. Power draw is 150 W idling and below 20 W in standby. It measures 440 x 254 x 545 mm (W x H x D) and weighs about 64 kg, or 75 kg shipped.
Engineering and use context
Unlike the other DX9 models, the Calysto has a wider class A operating region in its output stage, aimed at the upper midrange and high frequencies at low output power. It is also the classic design of the range, powered by a fixed voltage, while the Apollo, Athene and Artemis draw several voltages from their power blocks. Its custom toroidal mains transformer is designed in-house, with long-life capacitors for filtering and energy storage.
Like its siblings, it has only discrete components in the signal path and no operational amplifiers. Two identical power stages operate in inverse phase in a fully symmetrical bridged layout, with hand-matched transistors in parallel. Bias is set by the DXDrive circuit of the DX901 hybrid chip, which monitors the idling current directly rather than using thermal sensing. A zero-feedback discrete unity-gain buffer forms the input stage, where a sealed relay selects XLR or RCA and a limiter engages only on overload. Protection covers mains over- and under-voltage, overheating, overdrive, output short circuit, DC at the output and excessive HF/RF, with soft start. Analog Domain covers parts and labour for ten years, and the warranty is transferable.
Pairing
A preamplifier with XLR balanced or RCA unbalanced outputs is required. The 12 V trigger input and output use 3.5 mm jacks. In a split system the matching LF channel amplifier is the Apollo.
Alternatives
The Analog Domain Artemis has the same 254 mm chassis height and is rated at 1 kW into 8 ohms peak, with 52 output transistors.