Hifiverse

Power amplifiers stereo - Audio Note Conqueror

Description, images, technical data and specifications

Audio Note Conqueror
Image source - (c) Audio Note

The Conqueror is a stereo power amplifier from Audio Note (UK), the British company that grew out of Hiroyasu Kondo's Japanese Audio Note. It is a pure Class A single-ended tube amplifier with the 300B directly heated triode in its output stage. Audio Note places it at Level 3 of its range, and it fulfils all criteria of that level - pure Class A operation, zero negative feedback, a single-ended output stage, tube rectification, directly heated triode operation and Level 3 materials and component quality.

Key specs that matter

Maximum output is 8 W RMS per channel into 4 or 8 ohm loads. Input impedance is 100 kOhm (line level), input sensitivity is 250 mV for full output and channel balance is ±0.3 dB. Its tube complement is two 6SN7 input stage tubes (two 6J5 in the Low Gain versions), two 300B output tubes and one 5U4G rectifier. Mains input is AC 100-120 V / 220-240 V, 50/60 Hz, and maximum power consumption is 270 VA. Dimensions are 195 x 205 x 506 mm (H x W x D), and weight is 20 kg.

Engineering and use context

Six versions exist - Conqueror, Conqueror Silver and Conqueror Silver Signature, each also as a Low Gain model. The Silver version adds Audio Note tantalum film resistors, Audio Note copper foil signal capacitors and IHiB C-core output transformers. In the Silver Signature, the output transformers are IHiB double C-core types, again with copper foil signal capacitors and tantalum film resistors.

Connections are one pair of single-ended RCA inputs and three binding posts per channel, marked 0, 4 Ohm and 8 Ohm. Mains connection is through an IEC 320 inlet, with the fuse and a spare in its fuse drawer. Fascia options are anodised aluminium or black acrylic, and the top plate comes in anodised aluminium or black anodised aluminium.

The amplifier ships without its five tubes installed, and the owner installs them before first use. Audio Note quotes about 6000 hours of tube life and specifies replacement only with matched pairs. Bedding in takes about 100 hours, and after that a warm-up of 30 to 45 minutes is required at each switch-on. At least 20 cm of free space above the chassis is required for ventilation.

Pairing

A preamplifier with a single-ended RCA output is required. The output taps allow 4 ohm or 8 ohm loudspeakers. High-sensitivity loudspeakers such as the Audio Note AZ-Two Deluxe match its output.

Alternatives

The Tomei Kensei is a Level 4 stereo power amplifier from Audio Note with two 211 triodes, balanced XLR inputs and about 20 W per channel.

Specifications

  • Model name

    Conqueror

  • Input sensitivity (mV)

    250

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    100 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    8

  • Output power (4Ω) (W)

    8

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    195 x 205 x 500

  • Weight (kg)

    20

  • Official link

More components