The P3 Tonmeister is a stereo power amplifier from Audio Note (UK), a pure Class A single-ended tube design with one 300B directly heated triode per channel. Audio Note describes it as the latest version of its classic P3 300B single-ended triode amplifier, with a completely redesigned circuit, engineered for sonic performance rather than technical specification. Three grades are offered - P3 Tonmeister, P3 Silver Tonmeister and P3 Silver Signature Tonmeister - with a fascia in anodised aluminium or black acrylic.
Key specs that matter
Maximum output is 8 W RMS per channel into 4 or 8 ohm loads. Input impedance is 100 kohm at line level, and input sensitivity is 450 mV for full output. Channel balance is ±0.3 dB. The tube complement is two 300B, one 5687, one ECC82 and one 5U4GB. Dimensions are 220 x 460 x 530 mm (H x W x D), weight is 27.5 kg, mains input is AC 100-120 V or 220-240 V, 50/60 Hz, and maximum power consumption is 200 W.
Engineering and use context
All six Audio Note (UK) Level 3 criteria are met - pure Class A operation, zero negative feedback, a single-ended output stage, tube rectification, directly heated triode operation, and materials and component quality.
Its interstage and output transformers are I-E M4 copper/copper types, designed and wound in-house, and the PSU choke and mains transformer are IE copper/copper parts. According to Audio Note, the redesign relies on closely matched in-house transformers, custom resistors, in-house foil capacitors and custom electrolytic capacitors. Internal wiring is copper, signal wiring is AN-C copper interconnect, and the parts list includes Audio Note copper signal capacitors, STD electrolytic capacitors and 0.5 W and 1 W magnetic tantalum resistors.
A custom potentiometer forms the front-panel stereo volume control, which sets overall system gain. Each channel has three colour-coded binding posts marked 0, 4 ohm and 8 ohm, next to a single pair of RCA inputs and an IEC 320 mains inlet. Tube life is approximately 6000 hours.
Pairing
A line preamplifier with RCA outputs is required. Loudspeakers of 4 or 8 ohms connect to the matching tap. The front volume control allows the preamplifier volume control to work in the middle of its travel.
Alternatives
The Audio Note (UK) P2 SE is a parallel single-ended stereo power amplifier with a pair of 6L6G/5881 output tubes per channel and 18 W RMS per channel.