Hifiverse

Power amplifiers mono - Emotiva XPA-DR1

Description, images, technical data and specifications

Emotiva XPA-DR1
Image source - (c) Emotiva

The XPA-DR1 is a monoblock power amplifier from Emotiva's XPA-DR Differential Reference series, designed, assembled and tested at the company's plant in Franklin, Tennessee. One chassis holds a single Differential Reference Amplifier Module and its own power supply. Emotiva lists stereo systems with a pair of units, 2.1 music systems and the front left, centre or right channels of a home theatre as its applications. A full five-year warranty applies.

Key specs that matter

Power output is 650 W RMS into 8 ohms and 1000 W RMS into 4 ohms, both at <0.1% THD. Power bandwidth at rated power is 20 Hz - 20 kHz (±0.1 dB), and broadband frequency response is 20 Hz - 50 kHz (+0/-2 dB). THD+N is <0.015% (100 W RMS, 1 kHz, 8 ohms). Signal-to-noise ratio is >122 dB ref rated power and >96 dB ref 1 W (unbalanced input, A-weighted). Damping factor is >500 into 8 ohms. Gain is 29 dB, with an input sensitivity of 2.4 V for rated power. Input impedance is 33 kohms balanced and 23.5 kohms unbalanced. Minimum recommended load is 4 ohms. Maximum power consumption is 1,000 W. The full-size chassis measures 432 x 203 x 483 mm (W x H x D, with feet) and weighs 16.1 kg.

Engineering and use context

Each Differential Reference module is a matched, symmetrical pair of amplifier modules connected as a balanced differential pair. According to Emotiva, this connection cancels a significant portion of the remaining nonlinearity. The circuit shares its basic topology with the XPR series - a differential input stage with a cross-linked current source drives a balanced voltage amplification stage, followed by a complementary, fully discrete Class A/B output stage. With Soft-Switch Class H, the output stage runs from a lower supply rail at low power and switches to a higher rail when the signal requires it.

Power comes from a custom-configured, fully regulated switch mode power supply rated for over 3 kW continuous. Its output stage is floating and differential, so the speaker terminals must never be tied together or ground referenced. The modular 4RU chassis is heavy steel with a milled aluminium faceplate and accepts up to three modules, and two more modules can be installed later by Emotiva or an authorised service centre. Protection covers excessive temperature, shorted speaker connections and ground faults, and a resettable push-button circuit breaker on the rear guards against AC line faults.

Pairing

A preamplifier or AV processor with XLR or RCA outputs is required, and a metal toggle switch selects the input. The trigger input and output link it to other trigger-enabled equipment.

Alternatives

The XPA-1 Gen3 is Emotiva's monoblock on the XPA Gen3 platform, with one High-Powered Single-Channel Module rated at 300 W into 8 ohms.

Specifications

  • Model name

    XPA-DR1

  • Input sensitivity (mV)

    2400

  • Input impedance (balanced) (Ω)

    33 000

  • Input impedance (single-ended) (Ω)

    23 500

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    650

  • Output power (4Ω) (W)

    1000

  • Gain (dBu)

    29

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Signal to Noise Ratio (dB)

    >122

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    < 0.015

  • Max power consumption (W)

    1000

  • Damping factor

    >500

  • Dimensions (mm)

    432 × 203 × 483

  • Weight (kg)

    16.1

  • Official link

More components