The Concero 25 is a single-ended monoblock power amplifier with directly heated tubes from Aries Cerat and the top model of its smaller Prestige Series. Its redesigned version uses a blend of technologies from the previous Concero 25 and the Concero 65, modified to use the 845 output tube. The UK price is GBP 24,950 per pair with Elrog 845 tubes.
Key specs that matter
Output power is 20 - 25 W depending on the bias setting. Gain is 1 times in the standard low gain version and 7 times in the medium gain version. The noise floor is below 100 dB A-weighted. Per channel the tube list is one Elrog 845 and one RCA 814. Power consumption at idle is 200 W. Each amplifier measures 550 x 430 x 280 mm (W x D x H) and weighs 65 kg unpacked.
Engineering and use context
The output stage is designed for the 845 tube and comes as standard with the Elrog 845. Its power supply, biasing circuit and output transformer are developments of the Concero 25 MK1. A massive output transformer has selectable 2, 4 and 8 ohm secondary windings, and Aries Cerat rates it to take 60 W at 20 Hz.
For the driver stage Aries Cerat uses the design of its bigger models such as the Concero 65. It is a small single-ended amplifier with its own power supplies, transformers, bias stage and filament supplies. The driver tube is the 814 directly heated pentode, transformer coupled to the grid of the output tube through a very wide-bandwidth interstage transformer. No RC coupling is used.
Separate power supplies are used throughout, supplied by two toroidal transformers rated at over 900 VA in total, for the driver stage, output stage, filaments and bias circuits. Driver and output supplies are ground-choke filtered, and the energy banks store over 4,000 J per channel.
In both directly heated tubes the filament supply is part of the signal current loop. As in all Aries Cerat DHT single-ended amplifiers, the filaments run on DC with triple PI CRC filters. Driver and output stage bias is shown on built-in digital monitors and set with bias adjusting knobs, on the fly and even while music is playing.
Pairing
A high-gain, high-output preamplifier is preferred, according to Aries Cerat. The output transformer is set to the 2, 4 or 8 ohm winding to match the nominal impedance of the loudspeaker.
Alternatives
The Concero 65 Reference is the bigger Aries Cerat single-ended monoblock power amplifier, with one 814 driving a parallel pair of 813 output tubes per channel.