Hifiverse

Power amplifiers mono - Aries Cerat Concero 65 LE

Description, images, technical data and specifications

Aries Cerat Concero 65 LE
Image source - (c) Aries Cerat

The Concero 65 Limited Edition is a 65 W single-ended triode (SET) monoblock power amplifier from Aries Cerat and the highest of three versions in the Concero 65 series, above the Reference and the Signature. Those two are smaller versions of the Exsequor monoblock with its 814 driving 813 topology. The Limited Edition instead descends from the Legend Series Achilleas and uses an 813 driving 813 circuit, with the same 813 directly heated triode in the driver and the output stage.

Key specs that matter

Each channel has three 813 tubes - a parallel pair of RCA 813 in the output stage and one 813 in the driver stage. Gain is x3 (9.5 dB), and the noise floor is below 105 dB unweighted. Second harmonic distortion is -75 dB at 1 W and -55 dB at 10 W. Signal bandwidth is 8 Hz - 110 kHz at 80% of maximum power. Output impedance is user selectable - 1.6 ohms on the 8 ohm setting, 0.8 ohms on 4 ohms and 0.4 ohms on 2 ohms. Inputs are RCA and the proprietary AC link. Energy storage is 3000 J, the power transformer is rated at 1,800 VA, and consumption is 500 W per channel. Two stacked chassis measure 510 x 590 x 560 mm (W x D x H), and weight is 165 kg per channel.

Engineering and use context

In its own separate chassis the driver stage has tube-rectified power supplies and special biasing circuits. It is built as a small SET amplifier with its own interstage transformer, and Aries Cerat states that it can deliver 18 W. With the same tube type in the driver and output stages and a dedicated biasing scheme, the design uses harmonic distortion cancelling. A massive-core output transformer follows the output tubes.

Filaments of all three directly heated triodes are supplied through triple PI filters with a total capacitance of 700,000 µF, and in this edition they are also inductively isolated from their power supply units. All power supplies are independent, with their own transformers and chokes. Energy is stored in proprietary SuperCapacitors, a film type with 1 milliohm ESR, which the company quotes at ESR and ESL values 100 times lower than electrolytics. A pair of high-current damper tubes rectifies the driver stage supply. There are no capacitors in the signal path.

Driver and output stage bias can be monitored on built-in digital monitors and adjusted on the fly with dedicated knobs, including during playback.

Pairing

Two units are required for stereo. A preamplifier with an RCA output and a high output voltage is required. The output impedance setting is chosen to match the nominal impedance of the loudspeakers.

Alternatives

The Aries Cerat Concero 65 Signature is the middle version of the series, a smaller version of the Exsequor with an 814 driving 813 topology.

Specifications

  • Model name

    Concero 65 LE

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    1.6 (8-ohm tap only)

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    65

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    510 x 590 x 560

  • Weight (kg)

    165

  • Official link