Hifiverse

Power amplifiers mono - Aries Cerat Ianus QuintEssence

Description, images, technical data and specifications

Aries Cerat Ianus QuintEssence
Image source - (c) Aries Cerat

The Ianus QuintEssence is a class A monoblock power amplifier from Aries Cerat and the third amplifier in the company's Ianus Series. Each monoblock occupies two chassis. Like every Ianus model it uses TriodeFet technology, but here in a single stage, single-ended design rather than the circlotron output stage of the larger Geminae. The US price is USD 90,000.

Key specs that matter

Power output is 65 W into 8 ohms and 100 W into 4 ohms in class A, with stable operation down to 1 ohm. Gain is 26 dB, switchable to 22, 18, 14, 10 or 6 dB by the TVC system. Signal-to-noise ratio is 110 dB (ref. 0 dB). Full power bandwidth is 5 Hz - 60 kHz, with the upper range limited by oscillation prevention limiters. Damping factor is user switchable. Idle power consumption is 140 W per channel, depending on the bias setting. Inputs comprise one RCA, one TVC, one AC link and one true balanced XLR. Maximum dimensions excluding the plinth are 520 x 400 x 310 mm (H x W x D), and each monoblock weighs 95 kg unpacked.

Engineering and use context

There is no driver stage and no input stage, and it is a zero feedback design. The concept is shared with the smaller Essentia and the Aperio integrated, but the QuintEssence is not simply a higher powered version of them. Its output device is a new generation of the TriodeFet, whose transfer curves follow those of the reference tube more closely than the previous generation. According to the company, this topology needs an active element with high linearity, high voltage gain, high current gain and very high input impedance. Internal tubes for curve creation are rated at 10,000 hours, and the amplifier is essentially maintenance free.

On the input side, the transformer volume control offers six level settings and accepts both standard gain preamplifiers and the high gain preamplifiers of Aries Cerat. The same TVC input is also found on the Geminae. AC link is a proprietary Aries Cerat input, and the balanced XLR input is standard. Each Ianus amplifier, the company says, delivers more current than its tube counterparts.

Pairing

A preamplifier or source with an RCA, XLR or AC link output is required. The TVC input accepts a standard gain or a high gain preamplifier. Low-impedance loudspeakers are within its rated stability.

Alternatives

The Ianus Geminae is the larger Aries Cerat mono power amplifier, a TriodeFet circlotron design rated at 130 W into 8 ohms.

Specifications

  • Model name

    Ianus QuintEssence

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    1

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    1

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    65

  • Output power (4Ω) (W)

    100

  • Gain (dBu)

    26

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    140

  • Damping factor

    N/A

  • Dimensions (mm)

    520 x 400 x 310

  • Weight (kg)

    95

  • Official link