Hifiverse

Integrated amplifiers — Audionet WATT

Description, images, technical data and specifications

Audionet WATT
Image source - (c) Audionet

The WATT is an analogue integrated stereo amplifier in the Scientist Series from Audionet, the German maker. Audionet positions it above its SAM integrated amplifier. Input stage, volume control, power amplifier section and power supply are laid out in double mono, inside a massive aluminium body with resonance-optimised fixing and invisible screws.

Key specs that matter

Output power is 2 x 167 W into 8 ohms, 2 x 284 W into 4 ohms and 2 x 443 W into 2 ohms. Frequency response is 0.3 Hz - 650 kHz (-3 dB). THD+N is below -98 dB (1 kHz, 100 W/4 ohms), and harmonic distortion is k2 typ. -101 dB and k3 typ. -107 dB (1 kHz, 25 W/4 ohms). SNR is above 106 dB (A-weighted), channel separation is above 103 dB at 1 kHz and the damping factor is typ. 1,000 at 100 Hz. Input impedance is 50 kohms on the line inputs and 7 kohms on the XLR input. Dimensions are 430 x 130 x 450 mm (W x H x D), and weight is 25 kg.

Engineering and use context

Audionet uses its ULA technology (Ultra Linear Amplifier) with a non-disengageable DC servo, and there are no capacitors or coils in the signal path. Volume control is electronic, with high audio-grade components. Circuit and device design are optimised magnetically and capacitively for the shortest signal paths. Control and analogue sections have separate power supplies, and two further supplies serve the driver stage and the power stage. One encapsulated 50 VA toroid transformer with separate windings supplies the input and driver stage, while two encapsulated 700 VA toroid transformers supply the power stage. Total filtering capacitance is 200,000 µF.

An optional phono module for MM and MC pickups is also built in double mono and is set up through the user menu. Internal wiring is gold-doped pure silver cable, and the fuse is a rhodium type. Inputs are three pairs of Teflon-insulated RCA and one pair of Neutrik XLR. Outputs comprise two pairs of Furutech rhodium 4 mm speaker terminals, an RCA pre-out, two optical Audionet Link outputs (Toslink) and a switchable 6.3 mm headphone socket driven by the power stage. A bypass mode is provided for home cinema integration. Its microprocessor has a separate power supply and reports through a dimmable display.

Finishes are Ultra in C-32 light bronze with a white display, or Classic in silver or black with a blue or red display. The front and plates are 12 mm brushed aluminium, the cover is 6 mm, and a WATT/PLANCK metal remote control in matching colour is included.

Pairing

The power stage is rated into 2-ohm loads as well as 4 and 8 ohms. A turntable requires the optional MM/MC phono module. The RCA pre-out allows an additional power amplifier.

Alternatives

The HUMBOLDT is another integrated amplifier in the Audionet range.

Specifications

  • Model name

    WATT

  • Type

    N/A

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    3

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    7000

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    167

  • Output power (4Ω) (W)

    284

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    0.3

  • Frequency response high +/- 3dB (Hz)

    650 000

  • Signal to Noise Ratio (dB)

    >106

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    1000

  • Dimensions (mm)

    430 × 130 × 450

  • Weight (kg)

    25

  • Official link

More components