The SAM 20 SE is a strictly limited special edition of the SAM integrated amplifier from Audionet, built for the 20th anniversary of the SAM. Audionet describes it as a microprocessor-controlled integrated amplifier, and a phono card is included as standard. Its output stage uses the new MOSFET power transistors with low series resistance that also appear in the Audionet WATT.
Key specs that matter
Output is 110 W into 8 ohms and 200 W into 4 ohms. Frequency response is 0 - 500 kHz (-3 dB), and the damping factor is above 1,000 at 100 Hz. Harmonic spectrum is k2 typ. -101 dB and k3 typ. -106 dB (1 kHz, 25 W/4 ohms). SNR is above 103 dB (A-weighted), with channel separation above 93 dB at 1 kHz. Input impedance is 10 kohms/150 pF on the line inputs and 3 kohms/170 pF on the XLR input. Filtering capacity totals 120,000 µF. Each unit measures 430 x 110 x 360 mm (W x H x D) and weighs 15 kg.
Engineering and use context
Audionet applies its ULA technology (Ultra Linear Amplifier), and the circuit is completely DC-coupled with no capacitors in the signal path. Power comes from an encapsulated, cast-in 700 VA toroid transformer. In this edition the low-impedance audio-grade main capacitors are 15,000 µF each instead of 12,000 µF, so total capacitance rises by 25% over the 96,000 µF of the standard SAM. High-grade mica capacitors sit at the sound-critical points, and the internal signal wiring is gold-doped pure silver solid-core cable. A microprocessor with its own power supply controls all functions.
On the phono card, new integrated op-amps with low-noise FET inputs and optimised mica capacitors are used. Line inputs are five pairs of gold-plated, Teflon-insulated RCA plus one pair of balanced XLR. Outputs comprise an RCA pre-out, an RCA rec-out, a switchable 6.3 mm headphone jack and two pairs of Furutech rhodium 4 mm speaker terminals. One optical Audionet Link output switches other Audionet components on remotely, and a bypass mode is provided for home cinema integration. Both the front panel and the back panel are new, the front being engraved brushed aluminium in silver or black anodised finish with a red or blue display. Cover and sides are 4 mm and 8 mm brushed aluminium, and a dedicated SAM 20 SE metal remote control comes with it. Mains is 220 - 240 V or 110 - 120 V, 50 - 60 Hz.
Pairing
Loudspeakers of 4 or 8 ohms nominal impedance are within the rated load. A turntable connects directly to the built-in phono input. The RCA pre-out allows an additional power amplifier, and the bypass mode allows connection to a home cinema processor.
Alternatives
The SAM G2 is the standard version of the same Audionet integrated amplifier.