Hifiverse

Integrated amplifiers — Denon PMA-A110

Description, images, technical data and specifications

Denon PMA-A110
Image source - (c) Denon

The PMA-A110 is a limited 110th Anniversary Edition stereo integrated amplifier from Denon, finished in an exclusive Silver Graphite colour. It is one of four 110 Anniversary products, all made only at the Denon factory in Shirakawa, Japan. Each unit ships with a certificate of authenticity signed by the Denon head of engineering, and Denon lists a five-year out-of-box warranty for the model.

Key specs that matter

Denon rates output at 80 W per channel into 8 ohm from 20 Hz to 20 kHz with 0.07% THD, and 160 W per channel into 4 ohm at 1 kHz with 0.7% THD. Total harmonic distortion is quoted as 0.01%, the high-level inputs reach a signal to noise ratio of 110 dB, and MM phono sensitivity is 2.5 mV at 47 kohm. The tone controls give up to 8 dB of boost or cut, bass at 100 Hz and treble at 10 kHz. The chassis measures 434 mm wide, 450 mm deep and 182 mm high and weighs 25 kg. Power draw is 400 W in operation and 0.2 W on standby.

Engineering and use context

Its power section relies on the seventh generation of the Advanced Ultra High Current MOS single push-pull circuit, combined with a differential two-stage amplifier. Digital conversion is handled by four Burr Brown PCM1795 chips running in mono mode, with Ultra AL32 Processing for waveform interpolation. A rear USB-B port connects a computer to the onboard DAC and accepts PCM at 384 kHz/32-bit plus DSD2.8, DSD5.6 and DSD11.2 via DoP. There are three optical and one coaxial digital input for PCM at 192 kHz/24-bit, plus four stereo RCA line inputs. A DAC master clock design and asynchronous USB mode support bit-perfect transmission, while Source Direct and an Analogue Mode are also provided. The power stage is of discrete construction and draws on an LC-mounted twin transformer with a high current dynamic power supply. Balance and loudness functions sit alongside the tone controls, all under high precision electrical control. The anniversary treatment extends to the build, with an aluminium top cover and aluminium feet, a black interior, a double layer steel transformer plate, an upgraded back panel and exclusive A110 speaker terminals.

Pairing

A turntable fitted with either an MM or MC cartridge connects without a separate phono preamplifier, and a Power Amp Direct input lets an external preamplifier use the power stage alone. Remote control bus connections in and out are also fitted.

Alternatives

The Denon PMA-3000NE is a two-channel integrated amplifier with four ES9018K2M converters, dual-cartridge phono support and an Analogue Mode that disables the digital circuitry.

Specifications

  • Model name

    PMA-A110

  • Type

    Limited 110th Anniversary Edition 2 Ch. 160W Integrated Amplifier with Phono

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    3 + 1 (Phono)

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    80

  • Output power (4Ω) (W)

    160

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (%)

    0.01%

  • Damping factor

    N/A

  • Dimensions (mm)

    434x450x182

  • Weight (kg)

    25

  • Official link

More components